Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage
Shokry, S., Mokhtar, A., Ghoniemy, S. (2018). Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage. EKB Journal Management System, 11(11th International Conference on Electrical Engineering ICEENG 2018), 1-9. doi: 10.21608/iceeng.2018.30126
Shady Shokry; Ayman M. Mokhtar; Samy A. Ghoniemy. "Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage". EKB Journal Management System, 11, 11th International Conference on Electrical Engineering ICEENG 2018, 2018, 1-9. doi: 10.21608/iceeng.2018.30126
Shokry, S., Mokhtar, A., Ghoniemy, S. (2018). 'Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage', EKB Journal Management System, 11(11th International Conference on Electrical Engineering ICEENG 2018), pp. 1-9. doi: 10.21608/iceeng.2018.30126
Shokry, S., Mokhtar, A., Ghoniemy, S. Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage. EKB Journal Management System, 2018; 11(11th International Conference on Electrical Engineering ICEENG 2018): 1-9. doi: 10.21608/iceeng.2018.30126

Analysis and Calculations of Laser Damage Threshold for Optical Components Soft Damage

The International Conference on Electrical Engineering
Article 8, Volume 11, 11th International Conference on Electrical Engineering ICEENG 2018, April 2018, Page 1-9  XML PDF (1.33 MB)
Document Type: Original Article
DOI: 10.21608/iceeng.2018.30126
View on SCiNiTO View on SCiNiTO
Authors
Shady Shokry; Ayman M. Mokhtar; Samy A. Ghoniemy
Abstract
Laser Weapons destruction capabilities are classified into hard and soft destruction. In this paper laser soft damage of an IR seeker was studied and CW laser power required for damaging (disturbing) a commercial CCD camera at different distance was calculated. An existing Cw Nd-YAG 130 W solid state laser source was enhanced and used to damage a CCD camera at 2 km, enhancement was performed in terms of power threshold, radiation transfer efficiency, beam overlap efficiency, and partial mirror reflectivity. A study of generation of 135 W output power from a Cw end pumping master
oscillator power amplifier (MOPA) Nd doped double clad fiber laser was done to achieve the goal of disturbing a CCD camera. Finally Optimization of laser output power was performed to fulfill the required laser power level that is needed to disturb or damage a CCD camera.
Keywords
Laser soft damage; power threshold; radiation transfer efficiency; Beam overlap efficiency; MOPA
Statistics
Article View: 620
PDF Download: 280