The Effect of Nano-silica coating on Micro-Shear Bond Strength of CAD/CAM PEEK to Resin Cement: (An In Vitro Study) | ||||
| Journal of Fundamental and Clinical Research | ||||
| Article 9, Volume 3, Issue 1, June 2023, Page 16-35 PDF (1.19 MB) | ||||
| Document Type: Original research articles | ||||
| DOI: 10.21608/jfcr.2023.167581.1040 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
nourhan hussein tawfik  1; ibrahim mohamed El-Sherbiny 2; Tamer ilhamy Shokry 3; Hanaa Hassan Zaghloul 4
| ||||
| 1fixed prosthodontics,dentistry,miu,cairo,egypt | ||||
| 2Nanomedicine Research Labs, Center for Materials Science (CMS), Zewail City of Science and Technology, 6th October City, 12578 Giza, Egypt | ||||
| 3head of Fixed Prosthodontics Department, Faculty of Oral and Dental Medicine, Al-Azhar University, Cairo, Egypt | ||||
| 4Vice dean of postgraduate studies and research affairs, Faculty of Oral and Dental Medicine, Misr International University, | ||||
| Abstract | ||||
| Background: PEEK is a polymer with lots of significant potentials making it an important candidate in dental applications, however strong durable bond of PEEK restorations with resin cement is still questionable. Aim: The aim of the present study is to evaluate the effect of different surface treatment protocols on the bond strength of PEEK surface with resin cement in comparison to Lithium Disilicate ceramic. Methodology: PEEK (P) and Lithium Disilicate discs (LD) were fabricated using CAD/CAM technique. A total of 40 samples were divided into four groups according to surface treatment protocol (n=10): Group (LD): hydrofluoric acid etching followed by silane application. Group (PP): 110 µm alumina particles sandblasting followed by Piranha solution acid etching. Group (PNsi): 110 µm alumina particles sandblasting followed by nano-silica coating and silane coupling agent respectively. Group (PN): 110 µm alumina particles sandblasting followed by nano-silica coating. All specimens underwent thermocycling. Micro-shear bond strength (μSBS) test was performed using a universal testing machine and the mode of failure was assessed using digital microscope. Surface roughness was assessed before and after surface treatment using optical profilometer. Results: statistically significant difference was found between the groups (P-value = 0.028, Effect size = 0.274). Pair-wise comparisons revealed that there was no statistically significant difference between (LD) and (PP); both showed the highest (μSBS). No statistically significant difference between (PNsi) and (PN); both showed the lowest (μSBS). Conclusion: piranha solution Surface treatment showed a comparable result to Lithium Disilicate. Whereas, nano-silica coated group showed the lowest bond strength values. | ||||
| Keywords | ||||
| CAD/CAM PEEK; surface treatment; nano silica coating; micro-shear bond strength; CAD/CAM Lithium Disilicate ceramic | ||||
|
Statistics Article View: 168 PDF Download: 211 |
||||
