Improving thermal performance and air flow inside the solar chimney by CFD simulation | ||||
| MSA Engineering Journal | ||||
| Volume 2, Issue 2 - Serial Number 6, March 2023, Page 1245-1277 PDF (1.81 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/msaeng.2023.302698 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Ayah H Radwan; Mostafa M.S Ahmed | ||||
| Department of Architecture, Faculty of Engineering, Assiut University, Assiut 71515, Egypt | ||||
| Abstract | ||||
| University buildings require a study environment prepared for students that helps improve student concentration and academic achievement, as the most important thing that may help improve thermal comfort is sufficient ventilation of the space and an appropriate temperature. Solar chimneys play a major role in improving thermal comfort for university spaces. The research dealt with the design of eight Solar chimneys on the southern facade of a classroom in the university campus in Sohag, Arab Republic of Egypt, to achieve the maximum indoor air velocity and the lowest temperature during the summer, with a special focus on thermal comfort for students, as the ANSYS program was used to simulate and analyse air movement, fluid flow, temperature distribution, and electromagnetic efficiency, and the study of other effects over time. A 3D model of the hall was created using Solid Work, and a solar chimney was proposed using PCM panels to achieve the best passive ventilation. First, the CFD numerical analyses were performed within the ANSYS program to test the best solar chimney dimensions and compare the results with field measurements. (DOE) experiments were conducted on two fixed dimensions with chimney widths 20 cm and 40 cm, with testing the chimney entrance openings of 20 cm x 20 cm and 40 cm x 40 cm and testing the internal temperature and air velocity in the hall over the study months in summer and winter and understanding the mechanism. The physical phenomenon of atmospheric buoyancy. The experiments also included the design of a solar chimney with a 45-degree inclined roof attached to a runway without considering the humidity factor. for the effect of wind speed in a vacuum with a deviation (RMS) of 0.8% between the two values. Runway temperatures were reduced by 2.5°C by a solar chimney and results of an improved solar chimney design to enhance indoor air movement, optimization results also showed that maximum indoor air velocity in the runway area is achieved by using a 20x80 chimney with 20x20 void and opening western windows in this case study. A solar panel with a height of 4 meters, a width of 0.8 meters, an inclination of 45 degrees, and an air gap of 0.2 meters. The proposed solar chimney and its advantages deserve further research. Based on this innovative concept, the solar chimney on the south façade can be redesigned, PCM panels assembled, the chimney width changed and the number of air intake holes in the chimney increased to form an efficient solar chimney, to serve as passive ventilation without much cost and make full use of solar energy., then reaching the maximum internal wind speed of the vacuum achieving thermal comfort by changing several parameters of the chimney. | ||||
| Keywords | ||||
| Solar chimney; University Buildings; Thermal comfort; Thermal Performance; natural ventilation; CFD simulation; ANSYS FLUENT | ||||
|
Statistics Article View: 63 PDF Download: 159 |
||||
