Effects of Zn and Sb additions on micro-structure, creep behavior and thermal properties of binary eutectic Sn-0.7%Cu lead-free solder | ||||
| Arab Journal of Nuclear Sciences and Applications | ||||
| Article 1, Volume 52, Issue 3, July 2019, Page 1-15 PDF (1.49 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ajnsa.2019.4450.1103 | ||||
 View on SCiNiTO | ||||
| Author | ||||
Amal M Yassin 
| ||||
| Physics department, faculty of Education, Ain Shams University. Cairo - Egypt | ||||
| Abstract | ||||
| The effects of Zn and Sb additions on microstructure, creep behavior and thermal properties of binary eutectic Sn-0.7%Cu lead-free solder were investigated. Results show that Zn-addition reduced the melting temperature of Sn-0.7Cu and enhanced the creep resistance due to the formation of Cu5Zn8 intermetallic compound (IMC) and reduction of Cu6Sn5 phase in β-Sn matrix. Conversely, the Sb-addition showed negative effect on both the creep resistance and melting temperature compared to the plain Sn-0.7Cu and Sn-0.7Cu-2.0Zn alloys due to the formation of SnSb IMC particles and coarse Cu6Sn5 phase through the β-Sn rich phase. The average stress exponents of 4.9 - 6.0 and activation energies of 50-60 KJ/mol were obtained for three solders; suggesting that the dislocation climb controlled by lattice diffusion is the dominant creep mechanism. X-ray diffraction (XRD) analysis revealed that the lattice parameters (a), (c), the axial rate (c/a) and the peak height intensities (hkl) of some crystallographic planes are changed with alloying additions and the crystallite size is decreased. | ||||
| Keywords | ||||
| Pb-free solders; Thermal properties; micro-structure; Alloying element additions; creep; X-ray analysis | ||||
|
Statistics Article View: 419 PDF Download: 543 |
||||
