The Effect of Machine Setting On Weft- Knitted Fabric Properties
Abdel-Megied, Z., ELBakry, M. (2010). The Effect of Machine Setting On Weft- Knitted Fabric Properties. EKB Journal Management System, 14(2), 83-96. doi: 10.21608/jtcps.2010.30521
Z. M. Abdel-Megied; M.A. ELBakry. "The Effect of Machine Setting On Weft- Knitted Fabric Properties". EKB Journal Management System, 14, 2, 2010, 83-96. doi: 10.21608/jtcps.2010.30521
Abdel-Megied, Z., ELBakry, M. (2010). 'The Effect of Machine Setting On Weft- Knitted Fabric Properties', EKB Journal Management System, 14(2), pp. 83-96. doi: 10.21608/jtcps.2010.30521
Abdel-Megied, Z., ELBakry, M. The Effect of Machine Setting On Weft- Knitted Fabric Properties. EKB Journal Management System, 2010; 14(2): 83-96. doi: 10.21608/jtcps.2010.30521

The Effect of Machine Setting On Weft- Knitted Fabric Properties

Journal of Textiles, Coloration and Polymer Science
Article 2, Volume 14, Issue 2, December 2010, Page 83-96  XML PDF (379.98 K)
DOI: 10.21608/jtcps.2010.30521
View on SCiNiTO View on SCiNiTO
Authors
Z. M. Abdel-Megied1; M.A. ELBakry2
1Textile Research Division, National Research Centre, Cairo
2*Faculties of Specific Education, Home Economics, Mansoura University, Egypt.
Abstract
IN the field of garments manufacture produced from circular weft …. knitted fabrics, it is important that we understand the variables and processes used so that we can predict their impact on dimensional changes. This helps in solving technical problems and satisfying consumer needs. The present investigation was carried out using circular knitting machine gauge 24. It identified the effect of changing various settings of the machine on the characteristics of the knitted fabric produced. Three fabrics were used from combed cotton yarns with count 20/1, 24/1and 30/1 Ne to produce (parasula) single jersey. A regression analysis equation was used to predict fabric specifications. The scheme of research depended on producing three knitted fabric samples from every count with different cylinder diameter opening. Therefore, nine samples were used to investigate the change that happened to the fabric after relaxation, such as: fabric width, fabric weight, stitch density at in wall and course directions, and stitch length. The second stage of investigation was after dyeing and drying all the samples, which were produced under the same condition to identify the extent of the change in their specifications. The final Finishing stage set the fabric width at four different measurements for all samples to study the effect of drying heat on the weight/m2, stitch density wall/course, stitch length and shrinkage in wall and course directions.
 
 
Keywords
Weft knitted fabric; Drying heat; Various settings of the machine; Yarn count; Wall; and course density; Stitch length; Fabric shrinkage; feeding rate
Statistics
Article View: 371
PDF Download: 454