EXTRACTION OF URANIUM USING ALAMINE336 IN KEROSENE FROM SULFATE SOLUTION OF ABU-HAMATA SANDY CLAYSTONE ORE SAMPLE, SOUTHWESTERN SINAI, EGYPT | ||||
| Bulletin of Faculty of Science, Zagazig University | ||||
| Article 7, Volume 2017, Issue 1, 2017, Page 98-113 PDF (526.94 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/bfszu.2017.31045 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Abd El Wahab Abd El Wahab; Abdellah, W.M Abdellah, W.M | ||||
| Nuclear Materials Authority, P.O Box 530, El-Maadi, Cairo, Egypt | ||||
| Abstract | ||||
| The present study is concerned with the feasibility of using organic solvent, Alamine336 in kerosene to extract U from sulfate leach liquor of Abu-Hamata sandy clay stone ore sample. The prepared sulfate leach liquor assays 0.45g/L of U with achieved leaching efficiency of 98.9%. The obtained results indicate that U extraction efficiency depends mainly on Alamine 336 concentration, strongly influenced by pH value, contact time and the organic / aqueous (O/A) ratio. Uranium in the organic phase was stripped using a solution of 1M NaCl acidified with 0.2M H2SO4 with an achieved stripping efficiency of 93.9% at A/O ratio of 1/1 and shaking time of 5min. Not less than 99% of U in the obtained U rich strip solution was directly precipitated using H2O2 solution to produce the final pure product of U3O8. | ||||
|
Statistics Article View: 188 PDF Download: 412 |
||||
