Alternatives Binder in Printing Using Colored Pigments on Cotton Fabrics | ||||
Journal of Textiles, Coloration and Polymer Science | ||||
Volume 21, Issue 1, June 2024, Page 121-130 PDF (1.41 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/jtcps.2023.222697.1224 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ahmed G. Hassabo 1; Neaama A. Abd El-Salam 2; Nourhan A. Mohamed2; Nehad Z. Gouda2; Nadeen Khaleed2; Sohaila Shaker2; Abdullah Y. Alzahrani3; Hanan Othman2 | ||||
1National Research Centre (NRC), Textile Research and Technology Institute (TRTI), Pre-treatment and Finishing of Cellulose based Textiles Department (PFCTD), El-Behouth St. (former El-Tahrir str.), Dokki, P.O. 12622, Giza, Egypt | ||||
2Benha University, Faculty of Applied Arts, Printing, Dyeing and Finishing Department, Benha, Egypt | ||||
3Department of Chemistry, Faculty of Science and Arts, King Khalid University, Mohail Assir, Saudi Arabia | ||||
Abstract | ||||
Organic pigments with non-polar groups cannot be applied directly because they cannot be dissolved in water or the majority of organic solvents. Moreover, binders must be added to the printing paste since textiles and pigments do not adhere to one another, giving printed fabrics a stiff hand feel and poor rubbing fastness. In this research, we will discuss alternatives to the use of binder during printing with pigment, as well as digital printing on cotton fabrics, whether they are treated or using polymers that act as adhesives that do not cause a rough feeling on the surface of the fibers. | ||||
Keywords | ||||
pigments; binder; cotton fabrics; digital printing | ||||
Statistics Article View: 123 PDF Download: 58 |
||||