Vertical Skylight Pattern Optimization for Public Spaces: Daylighting and Visual Comfort Analysis for Changing the Shape of Sawtooth Opening in Airport’s Holding Room in Cairo | ||||
Port-Said Engineering Research Journal | ||||
Article 1, Volume 22, Issue 2 - Serial Number 1110, September 2018, Page 1-7 PDF (1.36 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/pserj.2018.31779 | ||||
View on SCiNiTO | ||||
Authors | ||||
Khalid Younes 1; Ashraf Elmokadem 2; Osama Abo einan3; Dina Noaman4 | ||||
1Architect at the Suez Canal Authority, MSc Student at The Architectural Engineering and Urban Planning, Faculty of Engineering, Port Said University, Portsaid | ||||
2Professor and Head of Architectural Engineering and Urban Planning, Faculty of Engineering, Port Said University, | ||||
3Associate Professor in Architectural Engineering and Urban Planning Department, Faculty of Engineering, Port-Said University | ||||
4Lecturer at Architectural Engineering and Urban Planning, Faculty of Engineering, Port Said University | ||||
Abstract | ||||
Well daylit public space, which ensures visual comfort, is one of the key design goals that architects and lighting designers seek. The public space such as airport’s waiting hall is characterized by large dimensions which can get efficient daylighting levels from a skylight. In Cairo where the sunny and clear sky, improper skylight design can generate extensive heat gain and discomfort glare problems. This paper aims to study the effect of changing the vertical skylight pattern on the uniformity and availability of daylight in the public space of airport holding room. This investigation conducted through changing the shape of north oriented sawtooth opening from one rectangle opening shape to arched opening shape with multi-divisions. Generating the 3d models and analyzing the daylighting performance conducted through a parametric simulation approach. This approach included three software programs which are Grasshopper, Diva for Rhino and Evalglare. Simulations were conducted using the weather data file of Cairo, Egypt. The performance assessment was based on four metrics; IES approved method -Spatial Daylight Autonomy (sDA) and Annual Sunlight Exposure (ASE) -, Daylight Availability (DA) and Daylight Glare Probability (DGP). Results show that the different patterns of sawtooth arched opening in Cairo reached the required daylighting performance and achieved the acceptance criteria of the assessment metrics according to the daylighting requirements of LEED V4. | ||||
Keywords | ||||
Daylighting- Skylight- Sawtooth- Spatial Daylight Autonomy (sDA); Annual Sunlight Exposure (ASE); Daylight Availability (DA); Daylight Glare Probability (DGP) | ||||
Statistics Article View: 378 PDF Download: 527 |
||||