The Role of Value Engineering Job Plan in Prioritizing Finishing Flooring Selection Criteria

[1] R. Sherif, and W. Ismaeel, “Developing Sustainable Guidelines for University Buildings Using Leed”. Sustainable Mega Project Conference, The British University in Egypt. 2016.

[2] J. Jovanovic, “Buildings’ Site Management and Supervision: Cost Analysis of Labor Positions”. International Journal of Engineering Trends and Technology. Vol. 69. No. 5, 242- 248, 2021. DOI: 10.14445/22315381/IJETT-v6915p231

[3] K. Rad, and O. Yamini, “The Methodology of Using Value Engineering in Construction Project Management”. Civil Engineering Journal. 2 (6): 262, 2016. DOI: 10.28991/cej-030986

[4] D. Alwerfalli, B. Czarnik, and A. Ali, “An Overview of Value Engineering in Product Development and Design”. Proceedings of the 2010 Industrial Engineering Research Conference. 2010.

[5] G. Norris. “Integrating Life Cycle Cost Analysis and LCA”. International Journal of Life Cycle Assessment (InLCA). 2001.

[6] O. Abisuga, I. Fomakin, and O. Oshadi, “Educational Building Conditions and the Health of Users”. Construction Economics and Building. 16 (4): 19, 2016. DOI:  10.51301AJCEB.v16i4.4979

[7] S. Schneider, S. Kuliga, C. Holscher, R. Conroy, D., A. Kunert, A. Kulik, and D. Donath. “Educating Architecture Students to Design Buildings from The Inside out: Experiences from a Research Based Design Studio”. 9^th International Space Syntax Symposium. 2013.

[8] R.  El Messiery, “Recognizing Cost Conciseness of Building Technology Methodologies Through Life Cycle Cost Analysis Technique”. Master Thesis, Architectural Department, Faculty of Engineering, Cairo University, Giza, Egypt. 2017.

[9] M. Al Orabi, and K. Al-Gahtani, “A Framework of Selecting Building Flooring Finishing Materials by Using Building Information Modeling (BIM)”. Advances in Civil Engineering. 2022. DOI: 10.1155/2022/8556714

[10] X. Wu, Z. Kou, P. Oldfield, T. Heath, and K. Borst, “Informal Learning Spaces in Higher Education: Student Preference and Activities”. Buildings. 1 (16): 252. 2021. DOI: 10.3390/buildings11.60252

[11] R. Shimokura , K. Yanagisawa, and S. Sasaki, “The Operation by the Education Providers and Learning Spaces at Independent Schools in Sweden”. Journal of Architecture and Planning (Transactions of AIJ). 81 (728): 2105- 2115. 2016. DOI: 10.3130/aija.81.2105

[12] N. Berman, “A Critical Examination of Informal Learning Spaces”. Higher Education Research and Development. 39 (1): 127- 140. 2020. DOI: 10.1080/07294360.2019.1670147

[13] T. Abdelhamid, “A10- Step Design Process for Architectural Design Studios”. Book: Sustainable Development and Social Responsibility. Vol. 1, 2020. DOI: 10.1007/978-3-030-32922-8_1

[14] M. Jendy, “The relation between the design of the educational spaces of Architectural colleges and their user’s behavioral performance”. Master Thesis, Architectural Department, Faculty of Engineering, Tishreen University, Syrian Arab Republic. 2013.

[15] T. Jebril, and Y. Chen. “The Architectural Strategies of Classrooms for Intellectually Disabled Students in Primary Schools Regarding Space and Environment”. Ain Shams Engineering Journal. 12 (3). 2020. DOI: 10.1016/j.asej.2020.09.005

[16] A. Ouzounis, G. Sidiropoulos, G. Papakostas, I. Sarafis, A. Stamkos, and G. Solakis. “Interpretable Deep Learning for Marble Tiles Sorting”. 2^nd International Conference on Deep Learning Theory and Applications. 2021. DOI: 10.5220/0010517000002996

[17] W. Ochen, F. D’ujanga, B. Oruru, and P. Olupot. “Physical and Mechanical Properties of Porcelain Tiles Made from Raw Materials in Uganda”. Results in Materials. 11 (14): 100195. DOI: 10.1016/j.rinma.2021.100195

[18] A. Gumowska, and G. Kowaluk. “Physical and Mechanical Properties of High-Density Fiber Board Bond with Bio-Based Adhesives”. Forests. 14(1): 84, 2023. DOI: 10.3390/f14010084

[19] P. Lertloypanyachai, and S. Thongsang. “Improving the Mechanical Properties of Rubber Floor Tiles by Rock Powder Particle as Filler in Natural Rubber”. Materials Today: Proceedings. S (7): 14907- 14911. 2018. DOI: 10.1016/j.matpr.2018.04.028

[20] T. Ateya, B. Balci, O. Bayraktar, and G. Kaplan. “Floor Coating Materials”. 5^th international Congress an Engineering, Architecture and Design. 2019.

[21] M. Baker. “The Application of Marble and Granite as Building Materials in Jordan”. Jordan Journal of Civil Engineering. 11(2): 234- 238, 2017.

[22] B. Altay, and E. Salci, “Exploring Designers’ Finishing Materials Selection for Residential Interior Spaces”. Architectural Engineering and Design Management. 2023. DOI: 10.1080/17452007.2023.2181753

[23] F. Labuan, and M. Waty, “Study of Selecting Floor Cover by Using the Value Engineering Method in Housing Project”. IOP Conference Series Materials Science and Engineering. 1007(1): 012076, 2020. DOI: 10.1088/1757-899x/1007/1/012076

[24] R. Nemeth, P. Posch, S. Molnar, and M. Bak, “Performance Evaluation of Strip Parquet Flooring Panels After Long-Term, in-Service Exposure”. Drewno. 57(193): 119- 134, 2014. DOI: 10.12841/wood.1644-3985.091.08

[25] K. Ilayaraja, and M. Egyaabal, “Value Engineering in Construction”. Indian Journal of Science and Technology. 8(32), 2015. DOI: 10.17485/ijst/2015/v8i32/87285

[26] B. Ramani, and J. Kumarpitroda, “A Study on Application of Value Engineering in Housing Project”. International Journal of Technical Innovation in Modern Engineering & Science [IJTIMES]. Vol. 4, No. 5, 2018.

[27] S. Amit, and H. Srivastava, “A Case Study Analysis Through the Implementation of Value Engineering”. International Journal of Engineering Science and Technology. 2011.

[28] M. Lakousha, “Value Engineering: Applying its Theories on the Life Cycle of Office Buildings in the New Cities of Egypt”. Master Thesis, Architectural Department, Faculty of Engineering, Cairo University, Giza, Egypt. 2016.

[29] M. Abdel-Raheem, V. Bubach, A. Abdel-Hameed, G. Sanchez, and L. Navarro, “Value Engineering and its Applications in Civil Engineering”. Construction Research Congress Conference. 2018. DOI: 10.1061/9780784481295.027  

[30] L. M. Khodeir, and A. El Ghandour, “Examining the Role of Value Management in Controlling Cost Overrun [Application on Residential Construction Projects in Egypt]”. Ain Shams Engineering Journal. 10(2019), 471- 479. DOI: 10.1016/j.asej.2018.1.1.008

[31] D. J. Scheicher, H. M. Baumann, D. W. Sullivan, and J. Yim, “Integrative Conceptual Review: Evaluating the Effectiveness of Performance Management: A30- Year Integrative Conceptual Review”. Journal of Applied Psychology. Vol. 104, No. 7, 851- 887, 2019. DOI: 10.1037/ap10000368

[32] D. Anicic, and J. Anicic, “Cost Management Concept and Project Evaluation Methods”. Journal of Process Management- New Technologies, International. Vol. 7, No. 2, 2019. DOI: 10.5937/jouproman7-21143

[33] M. Mas-Machuca, A. Akhmedova, and F. Marimon, “Quality Management: A Compulsory Requirement to Achieve Effectiveness”. Total Quality Management & Business Excellence. 32(13): 1- 20. 2018. DOI: 10.1080/14783363.2018.1548275

[34] M. Annamalai, and C. Ganapathy, “Value Management in Construction Projects”. International Journal of Current Engineering and Science Research (IJCESR). Vol. 8, Issue 3, 2021.

[35] K. B. O. Amoah, “Optimizing Building Information Modeling and Value Engineering Synergy for Construction Schedule and Cost Worth”. Journal of Civil Engineering Research. 13(1): 12- 23, 2023. DOI: 10.5923/J.JCE.20231301.02

[36] F. J. Bromilow, and M. R. Pawsey, “Life Cycle Cost of University Buildings”. Construction Management and Economic. 5(4): S3- S22, 2013. DOI: 10.1080/01446193.1987.10462089

[37] R. Heralova, “Life Cycle Costing as an Important Construction to Feasibility Study in Construction Projects”. Procedia Engineering, 196: 565- 570, 2017. DOI: 10.1016/j.proeng.2017.08.031

[38] N. N. Kale, D., and R. Menon, “Life Cycle Cost Analysis of Commercial Buildings with Energy Efficient Approach”. Prespective in Science, 8 (c), 2016. DOI: 10.1016/j.pisc.2016.04.102

[39] A. Reina, A. Kocsis, A. Merlo, I. Nemeth, and F. Aggogeri, “Maintenance Decision Support for Manufacturing System Based on the Minimization of the Life Cycle Cost”. 49^th CIRP Conference on Manufacturing Systems, (CIRP- CMS 2016), 674- 679. DOI: 10.1016/j.procir.2016.1.117

[40] S. Pazarceviren, and B. Dede, “Life Cycle Costing Model Based on Target Costing and Activity-Based Costing Method and a Model Proposal”. European Scientific Journal. 2015.

[41] Saaty T. L., and Vargas L. G., “Models, Methods, Concepts and Applications of the Analytic Hierarchy Process”. International Series in Operations Research & Management Science. Vol. 175. USA: Springer. 2012.

[42] https://data.worldbank.org/indicators/FP.CPI.TOTL.ZG?locations=EG – Accessed in 14-5-2023 at 22.00 O’clock.

[43] F. J. V., “Systems Life Cycle Costing Economic Analysis, Estimation, and Management”. Boca Raton, CRC Press. 2011.

[44] J. Kneifel, and D. Webb, “Life Cycle Costing Manual for Federal Energy Management Program”. NIST Handbook 135. 2020 Edition.

[45] B. Ellis, “Life Cycle Cost”. The Jethro Projects. 2007.

[46] S. Atabay, and N. Galipogullari, “Application of Value Engineering in Construction Projects”. Journal of Traffic and Transportation Engineering. Vol. 1, No. 1, PP. 39- 48,2013. DOI: 10.17265/2328-2142/2013.12.005