Removal of Anthraquinone Dyes from Aqueous Solutions Using Activated Carbon Fiber Prepared from Polyacrylonitrile Waste | ||||
Egyptian Journal of Chemistry | ||||
Volume 66, Issue 12, December 2023, Page 59-69 PDF (809.59 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ejchem.2023.236460.8616 | ||||
View on SCiNiTO | ||||
Authors | ||||
Mohamed Nasr1; Mervat Salah Elsedik 2; Yehia Youssef 3 | ||||
1Protein & Manmade Fibres Department, Textile Industries Research Division, National Research Centre | ||||
2national research centre | ||||
3Dyeing, Printing and Auxiliaries Department, Textile Research Division, National Research Centre, Cairo 12622, Egypt | ||||
Abstract | ||||
In this study, the adsorption of three different blue anthraquinone dye classes (Reactive, Acid and Disperse dyes) were investigated using activated carbon fibre prepared from polyacrylonitrile (PAN) waste. The use of polyacrylonitrile based activated carbon fiber (PAN-ACF) for the adsorption of these dyes has been examined using exhaustion method at different operational conditions such as dye concentration and adsorption temperature. It was found that the adsorption of the anthraquinone dyestuffs on PAN-ACF increased with increasing temperature. In addition, the prepared ACFs exhibited higher adsorption capacities for the non-ionic anthraquinone based disperse dye than those of the anionic anthraquinone based reactive and/or acid dyes. | ||||
Keywords | ||||
Adsorption; Activated carbon fiber; Polyacronitrile; Anthraquinone blue dyes; Reactive dyes; Acid dyes; Disperse dyes | ||||
Statistics Article View: 62 PDF Download: 86 |
||||