Evaluation of Technique Sensitivity of Bilaminar and Trilaminar Layering Systems Using Digitally Calibrated Cross-Polarized Photography

Eldeeb, Amr Medhat; Anwar, Mohammed Nasser; Nour, Khaled Aly

doi:10.21608/edj.2023.223726.2641

	Evaluation of Technique Sensitivity of Bilaminar and Trilaminar Layering Systems Using Digitally Calibrated Cross-Polarized Photography
Egyptian Dental Journal
Volume 69, Issue 4 - Serial Number 5, October 2023, Page 3231-3244 PDF (1.22 MB)
Document Type: Original Article
DOI: 10.21608/edj.2023.223726.2641
View on SCiNiTO
Authors
Amr Medhat Eldeeb ¹; Mohammed Nasser Anwar ²; Khaled Aly Nour ²
¹Lecturer, Department of Operative Dentistry, Faculty of Dentistry, Ain Shams University, Cairo, Egypt
²Associate Professor, Department of Operative Dentistry, Faculty of Dentistry, Ain Shams University, Cairo, Egypt
Abstract
Objectives: To compare the effect of variation of the outer enamel layer thickness on the final shade for a bilaminar versus a trilaminar technique and to compare the effect of variation of the core layers thicknesses on the final shade for a trilaminar technique. Materials and methods: 144 resin composite discs of 10mm diameter were prepared and equally divided into 24 groups (n=6) according to the three levels of the study, Level 1: Color recipe (A1, A2 and A3). Level 2: Outer enamel layer thickness (0.25 mm and 0.75 mm). Level 3: Shade combination (Bilaminar, Trilaminar-1, Trilaminar-2, Trilaminar-3). Another 72 discs of same shade combination groups with outer enamel layer thickness of 0.5mm were prepared to serve as controls (12 groups, n=6). eLAB_prime software was used to digitally calibrate the cross-polarized photographs of the discs and measure the L, a and b* values. CIEDE2000 color difference formula (ΔE00) was adopted. Data were analyzed using three-way ANOVA and one-way ANOVA followed by Tukey’s post hoc test. Results: The bilaminar technique (1.09±0.65) had significantly higher color change value than the trilaminar technique (0.84±0.49) (p=0.010). The trilaminar-2 technique had the least color change value (0.70±0.36) (<0.001). Conclusions: The trilaminar technique is less sensitive to minor variation in outer enamel composite layer thickness compared to the bilaminar technique. Using equal thicknesses of body and dentin composites in the trilaminar technique produces the least change in color upon minor variation in outer enamel composite layer thickness.
Keywords
Anterior composite; Layer thickness; Bilaminar technique; Trilaminar technique; Cross-polarized photography


Statistics Article View: 379 PDF Download: 121