The Effect Of Using Ultrasonic In Sewing Leather Garments
elbarbary, A. (2021). The Effect Of Using Ultrasonic In Sewing Leather Garments. EKB Journal Management System, 11(4), 347-358. doi: 10.21608/idj.2021.66739.1015
Ahmed Fahem elbarbary. "The Effect Of Using Ultrasonic In Sewing Leather Garments". EKB Journal Management System, 11, 4, 2021, 347-358. doi: 10.21608/idj.2021.66739.1015
elbarbary, A. (2021). 'The Effect Of Using Ultrasonic In Sewing Leather Garments', EKB Journal Management System, 11(4), pp. 347-358. doi: 10.21608/idj.2021.66739.1015
elbarbary, A. The Effect Of Using Ultrasonic In Sewing Leather Garments. EKB Journal Management System, 2021; 11(4): 347-358. doi: 10.21608/idj.2021.66739.1015

The Effect Of Using Ultrasonic In Sewing Leather Garments

International Design Journal
Article 27, Volume 11, Issue 4 - Serial Number 41, July and August 2021, Page 347-358  XML PDF (709.51 K)
Document Type: Original Article
DOI: 10.21608/idj.2021.66739.1015
View on SCiNiTO View on SCiNiTO
Author
Ahmed Fahem elbarbary email orcid
Faculty of Applied Arts, Benha University
Abstract
The readymade garment industry plays a major role in the global economy, and the development of this industry has been linked to modern technology that appears in our daily life. Many studies have dealt with the uses of Ultrasonic in many fields, including the garment industry because of its future importance in reducing consumption and reducing waste of materials (threads) during the knitting process, and this research aims to how to take advantage of Ultrasonic sewing as an alternative to sewing. Conventional coupling ، In sewing leather garment materials, Ultrasonic sewing using Bonding tape was applied to two types of synthetic leather (imitation leather with a rubber ratio / imitation leather without rubber) and laboratory tests were performed to measure (tensile strength and elongation of sewing / sewing hardness / water permeability / permeability) Air) from sewing, and comparing it to traditional sewing (flat SSA-1 overlapping LSC2) on synthetic leather. The study found that Ultrasonic sewing has a high tensile strength, in addition to that the piece of garment is less permeable to air and water compared to traditional sewing, which allows air and water permeability to a large extent. The research paper also urges factories to pursue Ultrasonic sewing technology and develop these technologies to help provide auxiliary materials and reduce environmental waste that results from traditional sewing.
The research problem (about the extent to which Ultrasonic sewing can be used to enrich the functional side of leather garments? The effect of Ultrasonic sewing on synthetic leather materials?
Keywords
الموجات فوق الصوتية; الجلد الصناعى; وصلات حياکة التقليدية
Supplementary Files
References
  1. Flood, G. (1989), “Ultrasonic bonding of nonwovens”, Tappi Journal, pp. 165-170
  2. Appleby, C. K. (2009). Development of Fabric Seaming for Clothing Using Ultrasonic Sealing Technique.‏
  3. Ashour, S. A. (2018). “Improving the Comfort Properties of Commercial Maritime Uniform”. Master, Faculty of Applied Arts, Helwan University.
  4. Ashour, S. A. (2018). “Improving the Comfort Properties of Commercial Maritime Uniform”. MasterFaculty of Applied Arts-Helwan University
  5. Hafez, N. M., Saad, E. R., & Abdel Al, S. S. E. (2016). The design of creative Apparels employing leather ornamentation techniques. International Design Journal, 6(4), 329-338.‏
  6. https://www.jukiindustrial.co.uk/
  7. HYPERLINK http://fashiontrendzguide.blogspot.com/
  8. Kayar, M., & Mistik, S. I. (2014). Effect Of Fiber Type And Polyethylene Film On Mechanical Properties Of Ultrasonically Bonded Multi Layer Nonwoven Fabrics. Journal of Textile & Apparel/Tekstil ve Konfeksiyon, 24(1).‏
  9. Kayar, M., & Mistik, S. I. (2014). Effect Of Fiber Type And Polyethylene Film On Mechanical Properties Of Ultrasonically Bonded Multi Layer Nonwoven Fabrics. Journal of Textile & Apparel/Tekstil ve Konfeksiyon, 24(1).‏
  10. Kovačević, S., Ujević, D., & Brnada, S. (2010). Coated textile materials. Woven Fabric Engineering, 241-254.
  11. Mohamed, N. M. H., & Hassan, N. N. E. (2015). An investigation into the physical and functional properties and sew ability of Faux leather. International Design Journal, 5(2), 517-524
  12. Nguyen, T. H., Thanh, L. Q., Loc, N. H., Huu, M. N., & Nguyen Van, A. (2020). Effects of Different Roller Profiles on the Microstructure and Peel Strength of the Ultrasonic Welding Joints of Nonwoven Fabrics. Applied Sciences, 10(12), 4101
  13. Nguyen, T. H., Thanh, L. Q., Loc, N. H., Huu, M. N., & Nguyen Van, A. (2020). Effects of Different Roller Profiles on the Microstructure and Peel Strength of the Ultrasonic Welding Joints of Nonwoven Fabrics. Applied Sciences, 10(12), 4101
  14. Reddy, R. K. ((2007)). Ultrasonic seaming of PET, PET/cotton blend, and spectra fabrics.‏. S: Eastern Michigan University. Retrieved from https://commons.emich.edu/
  15. Reddy, R. K. ((2007)). Ultrasonic seaming of PET, PET/cotton blend, and spectra fabrics.‏. S: Eastern Michigan University. Retrieved from https://commons.emich.edu/
  16. Saad, E. R. (2015). Effect of sewing machine and thread type on the quality of leather garments. International Design Journal, 5(2), 367-373
  17. SEIF, M. A. (2016). A Comparative Study Of Assembling Methods Of Nonwoven Bags Traditional Sewing Vs Welding Seaming.‏ Vol - Issue 56- Page No 22-7. 5(6), 7-22.
  18. Seram, N., & Cabon, D. (2013). Investigating the possibility of constructing different seam types for clothing using ultrasonic. International Journal of Clothing Science and Technology.‏
  19. Shaeffer, C. (2003). Sew Any Fabric: A Quick Reference to Fabrics from A to Z. Penguin.‏
  20. Shaeffer, C. (2012). Sewing for the apparel industry. person education Inc.
  21. Ujević, D., Kovačević, S., Wadsworth, L. C., Schwarz, I., & Šajatović, B. B. (2009). Analysis of artificial leather with textile fabric on the backside. Journal of Textile and Apparel, Technology and Management, 6(2).‏
Yokoi, K., Watanabe, K., & Hashimoto, T. (2006). U.S. Patent Application No. 10/522,519.‏

Statistics
Article View: 345
PDF Download: 343