FROM THE PHOTOGRAPHIC CAMERA TO AN ELECTRO-OPTICAL IMAGING SYSTEM | ||||
The International Conference on Electrical Engineering | ||||
Article 57, Volume 5, 5th International Conference on Electrical Engineering ICEENG 2006, May 2006, Page 1-14 PDF (804.47 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/iceeng.2006.33652 | ||||
View on SCiNiTO | ||||
Authors | ||||
A A Somaie1; Naser El-Sheimy2; Ziad Abusara3; Mehdi Dehghani3 | ||||
1Egyptian Armed Forces. | ||||
2University of Calgary, Department of Geomatics Systems, Calgary, Canada. | ||||
3University of Calgary, Department of Physics and Astronomy, Calgary, Canada. | ||||
Abstract | ||||
Abstract The photography camera and a video camera system have used in many purposes from a hand camera to space imaging system. This paper is concerned to upgrade the photography camera that used for survey or surveillance applications. A direct method is to replace the film magazine and the shutter by a Charge Couple Device (CCD). Since the most of these photographic camera systems have a big size, in which the adapted CCD detectors are hard to be available or assembled. An alternative new technique will be described through this paper to upgrade the photography camera to an electro-optical imaging system. An example was applied to illustrate the upgrading procedures, and many experiments were done using survey photographic camera and the results were successfully. | ||||
Keywords | ||||
Electro-Optical Detectors; Photographic Camera; Digital image processing | ||||
Statistics Article View: 107 PDF Download: 171 |
||||