Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support
Mahmouda, A., Youssefa, N., Abo El Nagab, A., Selimc, M. (2019). Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support. EKB Journal Management System, 36(1), 226-247. doi: 10.21608/jsrs.2019.34280
Aya S. Mahmouda; Nadia A Youssefa; Ahmed O. Abo El Nagab; M. M. Selimc. "Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support". EKB Journal Management System, 36, 1, 2019, 226-247. doi: 10.21608/jsrs.2019.34280
Mahmouda, A., Youssefa, N., Abo El Nagab, A., Selimc, M. (2019). 'Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support', EKB Journal Management System, 36(1), pp. 226-247. doi: 10.21608/jsrs.2019.34280
Mahmouda, A., Youssefa, N., Abo El Nagab, A., Selimc, M. Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support. EKB Journal Management System, 2019; 36(1): 226-247. doi: 10.21608/jsrs.2019.34280

Removal of Copper Ions from Wastewater Using Magnetite Loaded On Active Carbon (AC) and Oxidized Active Carbon (OAC) Support

Journal of Scientific Research in Science
Article 14, Volume 36, Issue 1, April 2019, Page 226-247  XML PDF (947.05 K)
Document Type: Original Article
DOI: 10.21608/jsrs.2019.34280
View on SCiNiTO View on SCiNiTO
Authors
Aya S. Mahmouda* 1; Nadia A Youssefa2; Ahmed O. Abo El Nagab3; M. M. Selimc4
1Faculty of Women Ain Shams University.
2Faculty of Women Ain Shams University. .
3Egyptian Petroleum Research Institute (EPRI).
4National Research Centre (NRC).
Abstract
The magnetite Fe3O4 was supported on active carbon AC (Fe3O4 /AC) and oxidized active carbon OAC (Fe3O4 /OAC). It was prepared by co-precipitation method and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), surface area measurements (BET) and vibrating sample magnetometer (VSM) techniques. Fe3O4 /AC and Fe3O4 /OAC were used as adsorbents for removal of Cu (II) ions from wastewater. The effect of adsorption parameters such as contact time, the pH of the solution, the weight of adsorbent and the initial concentration of Cu(II) ions was elucidated to achieve the process’s optimal operational conditions. It was found that the removal percentage of the Cu(II) ions was reached to  96.15 % after 30 min. The adsorption process fitted very well the pseudo-second-order model and the adsorption equilibrium data could be well described by the Langmuir isotherm.
Statistics
Article View: 363
PDF Download: 443