Micro strip RF band-pass filter for user equipment W-CDMA receiver | ||||
| The International Conference on Electrical Engineering | ||||
| Article 116, Volume 6, 6th International Conference on Electrical Engineering ICEENG 2008, May 2008, Page 1-13 PDF (289.37 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/iceeng.2008.34385 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Wael M. Abdullah; Yahia M. El-Sayed | ||||
| Ain Shams University, Faculty of Engineering, Electronics & Comm. Eng. Dept., Cairo, Egypt. IEEE Student Member. | ||||
| Abstract | ||||
| Abstract: Microstrip structures are easy to fabricate and reveal effective success in RF distributed circuits such as RF filters. In this paper, the RF filter of the user equipment (UE) WCDMA receiver (f0 = 2.14 GHz and BW = 60 MHz) is to be designed via applying three different techniques; namely: the traditional parallel coupled lines method, edgecoupled hairpin structure and the microstrip ring resonator method. In each case minimizing the area is a goal. Two different types of the commercial substrates will be used. Circuit and electromagnetic (EM) simulations will be accomplished using the Agilent tool Advanced Design System (ADS) that uses the Momentum method in the EM simulation. Local implementation of the designed microstrip circuits is a target. | ||||
| Keywords | ||||
| Microstrip; Bandpass; Filter; Hairpin; Coupled Lines; Ring resonator | ||||
|
Statistics Article View: 95 PDF Download: 191 |
||||
