Effect of baffle configuration on the thermal performance attributes of shell and semi-circular tube heat exchangers | ||||
| Engineering Research Journal (Shoubra) | ||||
| Volume 53, Issue 1, January 2024, Page 279-291 PDF (1.66 MB) | ||||
| Document Type: Research articles | ||||
| DOI: 10.21608/erjsh.2023.243772.1236 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Nawaf M. Almulla; Mohamed Ahmed Moawed; Mohamed Ahmed Abd Elrahaman; Mohamed Reda Salem  
| ||||
| Mechanical Engineering Department, Faculty of Engineering at Shoubra, Benha University, 108 Shoubra St., 11629, Cairo, Egypt | ||||
| Abstract | ||||
| This study aims to improve the performance characteristics of a shell-tube heat exchanger in counterflow configuration. It considers the effect of using baffles and semicircular tubes as heat transfer surfaces. Twenty-nine heat exchangers are designed and constructed, consisting of tubes of circular or semicircular tubes (SCTs) with base spacing ratios () ranging from 23.6% to 55.1%. The examined baffles have a pitch ratio () of 1.47 to 2.36, a total cut ratio () of 16.5% to 25% and have two cutting configurations: edge cutting with a cutting ratio () of 0% to 16.5% and internal cutting baffles with a cutting ratio () of 0% to 16.5%. The experiments are done for Reynolds (3550≤Re_sh≤14580) and Prandtl numbers (4.47≤Pr_sh≤7.28). The results show that using baffles and/or SCTs increases the heat transfer rate and pressure loss, and when the SCT spacing ratio increases and baffles cut and pitch ratios decrease, these performance metrics significantly rise. However, baffles with edge cutting are better than those with internal cutting. The hydrothermal performance index is evaluated using the Stanton number of the shell side and f_sh ratios, with a maximum value of 2.54 achieved by utilizing baffles of = = 16.5%, = 0, = 1.47, and SCTs of = 55.1%, and lowest shell-side flow rate and inlet temperature. Finally, correlations are introduced to predict ¯Nu_sh and f_sh, besides the performance index of the tested heat exchangers. | ||||
| Keywords | ||||
| Heat exchanger; Baffles cut ratio; Baffles pitch ratio; Cutting configuration; Semi-circular tube | ||||
|
Statistics Article View: 70 PDF Download: 34 |
||||
