Architecture with microcontroller for the technical state evaluation of the switchgears contacts | ||||
The International Conference on Electrical Engineering | ||||
Article 157, Volume 6, 6th International Conference on Electrical Engineering ICEENG 2008, May 2008, Page 1-6 PDF (129.59 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/iceeng.2008.34529 | ||||
View on SCiNiTO | ||||
Authors | ||||
C. Pancu; A. Baraboi; M. Adam; A. Pleşca | ||||
“Gh. Asachi” Technical University, Iasi, Romania. | ||||
Abstract | ||||
Abstract: Electroerosion estimation of the contacts realised in operation leads to an overestimation inducing a supplementary maintenance. In this paper is shown an architecture with microcontroller for the technical state evaluation of the switchgears contacts, from electroerosion point of view. This approach has the advantage that the architecture can be used, also, for the monitoring of the some cinematic parameters for the operating mechanism like as: closing speed, opening speed, closing time, opening time, the energy accumulated in the acting mechanism and others. | ||||
Keywords | ||||
Electroerosion; switchgear; Architecture; Microcontroller | ||||
Statistics Article View: 98 PDF Download: 194 |
||||