Fabrication of Ion selective PVC Membrane Sensor for Potentiometric Determination of Escitalopram Oxalate in its Pure Form and Pharmaceutical Tablet | ||||
Bulletin of Pharmaceutical Sciences Assiut University | ||||
Articles in Press, Accepted Manuscript, Available Online from 08 April 2024 | ||||
Document Type: Original Article | ||||
DOI: 10.21608/bfsa.2024.277943.2064 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ali Mohammed Atiyah 1; Kameran Shukur Hussein 2; Abdul Majeed Khorsheed Ahmed 3 | ||||
1Department of Chemistry, College of Science, University of Kirkuk, Kirkuk, Iraq. | ||||
2Department of Chemistry, College of Science, University of Kirkuk, Kirkuk, Iraq | ||||
3Department of Chemistry, College of Education for Pure Science, University of Kirkuk, Kirkuk, Iraq. | ||||
Abstract | ||||
A new PVC membrane, ion selective electrode (sensor) was constructed and used for the determination of Escitalopram oxalate (ESC) in pure form and pharmaceutical preparation; the electrode was based on the use of the ion association complex of sodium tetra phenyl borate (STPB) as an anion with ESC as a cation in polyvinyl chloride (PVC) matrix with tri-butyl phthalate (TBPH) as a plasticizer. The results of this electrode showed stability (lifetime 30 days), near a Nernstian slope of 55.9 mv/decade, over a concentration range from 1x10-1-1×10-5 M, the electrode was found to be usable within the pH-range 3.0 – 6.0. This study also encompassed the measurements of the selectivity of this electrode in the existence of common cations, anions, and some drug excipients, and the selectivity factor was less than 1.0. The electrode was successfully applied to determine ESC in pharmaceutical preparation with a recovery of no less than 98.87%. | ||||
Keywords | ||||
Escitalopram oxalate; Potentiometric determination; PVC membrane electrode | ||||
Statistics Article View: 40 |
||||