INVESTIGATION OF PREMIXED COMBUSTION PROPERTIES OF GASEOUS FUEL (LPG, PROPANE, AND BUTANE) IN TUBULAR BURNER | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 54, Volume 16, 16th International Conference on Applied Mechanics and Mechanical Engineering., May 2014, Page 1-22 PDF (2.53 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.2014.35691 | ||||
View on SCiNiTO | ||||
Author | ||||
J. M. Abdulkarim | ||||
Dept. of Mechanical Engineering, Slemani Polytechnic University, Suleimanyah– Iraq. | ||||
Abstract | ||||
ABSTRACT In the present research, the propagation properties of premixed combustion at high stability has been investigated using three types of hydrocarbon fuels (LPG, C3H8, and C4H10) in a tubular burner. Experimental work has been carried out for laminar fuel-air mixture. Bunson burner methods were introduced for designing and manufacturing of integrated combustion system to get a wide range of equivalence ratio introducing all the reactance in combustion process, computed and increase the range efficiency of combustion stability to (s=9.33%), reducing losses in dead space zone, reducing emissions products by reducing the emission of (NOX,CO). The laminar burning velocity has been computed using two techniques based on flame frontal surface area and angle of frame front with aid of data image of flame front at atmosphere pressure and Tu=300K for a range of equivalence ratio (0.7< <1.5). Comparison of results with previous literature showed good agreement with the present work. | ||||
Keywords | ||||
Tubular burner; Premixed Flame; burning velocity; gases emission | ||||
Statistics Article View: 91 PDF Download: 324 |
||||