EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS
Yilmaz, H., Bedir, F., Elmas, U. (2014). EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS. EKB Journal Management System, 16(16th International Conference on Applied Mechanics and Mechanical Engineering.), 1-12. doi: 10.21608/amme.2014.35774
H. Yilmaz; F. Bedir; U. Elmas. "EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS". EKB Journal Management System, 16, 16th International Conference on Applied Mechanics and Mechanical Engineering., 2014, 1-12. doi: 10.21608/amme.2014.35774
Yilmaz, H., Bedir, F., Elmas, U. (2014). 'EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS', EKB Journal Management System, 16(16th International Conference on Applied Mechanics and Mechanical Engineering.), pp. 1-12. doi: 10.21608/amme.2014.35774
Yilmaz, H., Bedir, F., Elmas, U. EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS. EKB Journal Management System, 2014; 16(16th International Conference on Applied Mechanics and Mechanical Engineering.): 1-12. doi: 10.21608/amme.2014.35774

EXPERIMENTALLY INVESTIGATING THE BALLISTIC PROPERTIES OF THE POLYMER-MATRIXED LAYERED AND FIBERREINFORCED COMPOSITE MATERIALS

The International Conference on Applied Mechanics and Mechanical Engineering
Article 84, Volume 16, 16th International Conference on Applied Mechanics and Mechanical Engineering., May 2014, Page 1-12  XML PDF (714.41 K)
Document Type: Original Article
DOI: 10.21608/amme.2014.35774
View on SCiNiTO View on SCiNiTO
Authors
H. Yilmaz1; F. Bedir1; U. Elmas2
1Suleyman Demirel Universitesi Makina Mühendisligi Bölümü, 32260 Isparta-Turkey.
2The Scientific and Technological Research Council of Turkey (TUBITAK), 06100 Ankara-Turkey. Corresponding author: Umran Elmas, Phone: +(90) 312-468-53-00 (Extension: 4572).
Abstract
ABSTRACT
In this study, the ballistic properties of the hybrid armor samples that have different
number of layers of para-aramid material Kevlar 129, polyethylene material SB21
and woven material E-glass, produced by hand lay-up and hand-pressing with using
epoxy resin matrix against 9 mm bullet, were investigated experimentally. In the tests
the protection levels are applied per NIJ 0101.04 standards (National Institute of
Justice (NIJ) Level III A, the approved U.S.A. Ballistic Standard). Results show that
the area of the delamination is important to quantify the ballistic properties.
Keywords
High Velocity Impact; polymer matrix composite; Ballistic properties
Statistics
Article View: 98
PDF Download: 233