A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends
El-Nashar, D., E. Ateia, E., Hassan, H., Abd El-Aziz, A. (2017). A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends. EKB Journal Management System, 60(5), 769-777. doi: 10.21608/ejchem.2017.828.1033
Doaa El-Nashar; Ebtesam E. Ateia; H. H. Hassan; A. K. Abd El-Aziz. "A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends". EKB Journal Management System, 60, 5, 2017, 769-777. doi: 10.21608/ejchem.2017.828.1033
El-Nashar, D., E. Ateia, E., Hassan, H., Abd El-Aziz, A. (2017). 'A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends', EKB Journal Management System, 60(5), pp. 769-777. doi: 10.21608/ejchem.2017.828.1033
El-Nashar, D., E. Ateia, E., Hassan, H., Abd El-Aziz, A. A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends. EKB Journal Management System, 2017; 60(5): 769-777. doi: 10.21608/ejchem.2017.828.1033

A Comparative Study of The Cure Characteristics, Mechanical Properties and Abrasion Resistance of Silica and Carbon Black Filled NBR/SBR Blends

Egyptian Journal of Chemistry
Article 3, Volume 60, Issue 5, October 2017, Page 769-777  XML PDF (1.56 MB)
DOI: 10.21608/ejchem.2017.828.1033
View on SCiNiTO View on SCiNiTO
Authors
Doaa El-Nashar email orcid 1; Ebtesam E. Ateia2; H. H. Hassan2; A. K. Abd El-Aziz2
1Head of Polymers and Pigment Department, Chemical Industries Research Division, National Research Centre
2Physics Department, Faculty of Science, Cairo University
Abstract
Comparison between incompatible and compatible blend of nitrile rubber (NBR) and styrene butadiene rubber (SBR) with acrylonitrile butadiene styrene (ABS) is studied. Physical rheological characteristics and abrasion resistance for the investigated samples are performed. The use of acrylonitrile butadiene styrene (ABS) as compatibilizer improves the abrasion resistance of the blends. The results indicated that filled blends with carbon and silica offer processing advantages over unfilled blends. The ultrasonic and scanning electron microscope (SEM) are used to analyze the obtained data.
Keywords
Rubber; rheology; Microscopy; blend; Abrasion Resistance
Statistics
Article View: 770
PDF Download: 1,114