CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS
Bogdanov, J., Jeremić, R., Bajić, Z., Dimitrijević, R., Veličković, Z. (2012). CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS. EKB Journal Management System, 6(6th International Conference on Chemical & Environmental Engineering), 1-7. doi: 10.21608/iccee.2012.35899
J. Bogdanov; R. Jeremić; Z. Bajić; R. Dimitrijević; Z. Veličković. "CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS". EKB Journal Management System, 6, 6th International Conference on Chemical & Environmental Engineering, 2012, 1-7. doi: 10.21608/iccee.2012.35899
Bogdanov, J., Jeremić, R., Bajić, Z., Dimitrijević, R., Veličković, Z. (2012). 'CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS', EKB Journal Management System, 6(6th International Conference on Chemical & Environmental Engineering), pp. 1-7. doi: 10.21608/iccee.2012.35899
Bogdanov, J., Jeremić, R., Bajić, Z., Dimitrijević, R., Veličković, Z. CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS. EKB Journal Management System, 2012; 6(6th International Conference on Chemical & Environmental Engineering): 1-7. doi: 10.21608/iccee.2012.35899

CALCULATIONS OF DETONATION PARAMETERS FOR HIGH EXPLOSIVES USING DIFFERENT METHODS

The International Conference on Chemical and Environmental Engineering
Article 19, Volume 6, 6th International Conference on Chemical & Environmental Engineering, May 2012, Page 1-7  XML PDF (277.75 K)
Document Type: Original Article
DOI: 10.21608/iccee.2012.35899
View on SCiNiTO View on SCiNiTO
Authors
J. Bogdanov1; R. Jeremić2; Z. Bajić1; R. Dimitrijević2; Z. Veličković1
1Assistant Professor, Department of Military Chemical Engineering, Military Academy, Pavla Jurišića – Šturma Street 33, Belgrade, Serbia.
2Professor, Military Academy, Pavla Jurišića – Šturma Street 33, Belgrade, Serbia.
Abstract
Abstract: The detonation parameters can be calculated using different methods with satisfying accuracy. Different approaches of detonation parameters’ calculations are used in many fields of engineering practice. The calculation results of detonation parameters using semi-empirical method and thermochemical model of detonation are presented in this paper. Both methods are applicable for CHNO high explosives, and with some approximations for CHNOAl high explosives. The calculated values using semi-empirical method have significantly better accuracy compared with the well-known Kamlet's method. The thermochemical model uses BKW equation of state with different sets of parameters. The detonation products are calculated using the free-energy minimization criterion. The computer program XW is developed, which is using both methods. The XW is developed using the Delphy® 6.0, and it can be used on personal computers with operating system WindowsXP®. The analyzed XW calculation results of detonation parameters have good correlation with experimental data.
Using the semi-empirical method, obtained average differences of calculation results for considered high explosives were 1.9% for detonation velocity and 4.5% for detonation pressure. In the calculations using thermochemical model, average differences of calculation results were 2.05% for detonation velocity and 5.73% for detonation pressure. In the case of most used high explosives for military purposes, the precision of calculation results is even higher.
Statistics
Article View: 178
PDF Download: 210