A Proposed Preheating Technique for Enhancing the Thermal Performance of a Flat-Plate Solar Collector: An Experimental Study | ||||
| Journal of Advanced Engineering Trends | ||||
| Volume 43, Issue 2, June 2024, Page 101-115 PDF (1.02 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jaet.2023.162656.1227 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Haitham Farhat Karar  1; Ramadan Bassiouny Mohamed 2; Mohamed Salah Hassan3; Mohamed Reda Othman Ali4
| ||||
| 1Mechanical& power energy, Faculty of engineering, Minia university, Minia, Egypt | ||||
| 2mechanical engineer, mechanical& power Energy Engineering,mania city, Mania | ||||
| 3Mechanical Power Engineering and Energy Department, Faculty of Engineering, Minia University, Minia. 61519, Egypt. | ||||
| 4Mechanical Power Engineering and Energy, Faculty of Engineering, Minia University | ||||
| Abstract | ||||
| Due to the worldwide continuous increase in energy demand and cost, great efforts are exerted to seek, develop, and use alternative energy sources. The solar energy is the cleanest renewable source to be used in many applications. One of these applications is the water solar heater. Being simple, cheap, and has low maintenance, the solar heater has been attracting many researchers to study its performance and seek ways for enhancement. Previous efforts focused on enhancement techniques as absorber surface modification, using phase change material, nano-fluids, thermal coating, and using porous medium around the absorber. As a proposed idea, the present investigation utilizes the stored thermal energy in sandy soil to warm the flowing water before entering the solar heater collector. An experimental, locally manufactured water solar heater was installed in El Wadi El Jadid region (24 33 latitude and 27 13 longitude). The results showed an enhancement in the performance of the water solar heater using the thermal energy stored in sand. The daily solar collector efficiency and average outlet water temperature improved by nearly 14.7% and 26%, when sand storage was covered with a plastic transparent sheet and sand was wetted with a certain percentage of waste oil. | ||||
| Keywords | ||||
| water solar heater; flat-plate collector; solar energy; buried-tube heater performance; sand storage | ||||
|
Supplementary Files
|
||||
|
Statistics Article View: 36 PDF Download: 39 |
||||
