Manufacturing and Evaluating the Performance of Shaking Machine for Harvesting the Lime (Citrus aurantifolia) | ||||
| Journal of Soil Sciences and Agricultural Engineering | ||||
| Article 3, Volume 10, Issue 4, April 2019, Page 219-225 PDF (1022.84 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jssae.2019.36734 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. El Shal1; M. El Didamony2 | ||||
| 1Agric. Eng. Dept., Fac. of Agric., Zagazig Univ., Egypt | ||||
| 2Agric. Eng. Dept., Fac. of Agric., Tanta Univ., Egypt | ||||
| Abstract | ||||
| Limes are manually picked all over the worldwide. To reduce the number of labour, time and reduce harvest costs of Egyptian lime. The machine was manufactured to operate an electric motor with different masses to give four frequencies during different shaking time for shaking harvesting. During shaking main branches, a certain amount of ripe lime couldn't be detached primarily due to an insufficient level of transferred energy. Harvesting tests showed that about 91 % of ripe lime without any fell of small green lime or flowers were detached under the recommended frequency of 45 Hz for the main branch shaking, shaking time 20 s and the mass of blocks W3 =365 g fastened on either side of the electric motor shaft. Recommended parameters during the shaker harvesting work as selective harvesting did not harvest unripe small green lime or fallen flowers just fell only ripe lime (yellow lime and greenish yellow lime). The study provided baseline knowledge and information for improving the lime harvesting to obtain high lime detach efficiency, save time, cost and labours for harvesting lime by manufactured an electric shaker. | ||||
| Keywords | ||||
| lime; Detach efficiency; frequency; Vibration; Shaker; Harvesting; productivity; Operating cost | ||||
|
Statistics Article View: 184 PDF Download: 469 |
||||
