Optimizing Influence of Process Parameters on Induction Hardening for IC Engine Valve | ||||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||||
| Article 8, Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., May 2010, Page 1-7 PDF (266.24 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/amme.2010.37519 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| R. Palanivasan; Ravi. M. Warkhedkar | ||||
| Department of Mechanical Engineering, Govt. College of Engineering Aurangabad, India. | ||||
| Abstract | ||||
| Abstract: Fatigue Behavior of induction hardened part is largely dependent on the correct combination of hardening depth and the magnitude. The objective of this work is to optimize the process parameters of the IHE of SH – 5395 Tuff Pattern in which experimentations have been conducted. Two types of coils quenched and tempered were investigated; the process parameters of IHE were varied to give a constant hardness penetration depth in both Spiral and Flat Coils, | ||||
| Keywords | ||||
| Hardness penetration depth; Spiral coil; Flat coil | ||||
|
Statistics Article View: 121 PDF Download: 95 |
||||
