Investigations of application of composite materials in packing machines | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 20, Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., May 2010, Page 1-10 PDF (1.01 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.2010.37600 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ana Pavlovic1; Snezana Ciric Kostic2; Cristiano Fragassa2; Zlatan Soskic2 | ||||
1Faculty of Mechanical Enginering-Kraljevo, University of Kragujevac, Serbia. | ||||
2Faculty of Mechanical Enginering-Kraljevo, University of Kragujevac, Serbia | ||||
Abstract | ||||
Abstract: The paper presents analysis of mechanical behaviour of components of packing machines in which steel parts are replaced by parts made of metal matrix composite materials (MMCM). In this purpose, linear analytical and numerical analyses were applied for calculation of stiffness of the parts, and nonlinear numerical analysis of functional behaviour of the components was performed. Besides, flexible dynamic analysis was applied for consideration of impact behaviour. The results show that, while masses of the parts are reduced around 25%, desired adhesive properties and impact resistance are achieved. | ||||
Keywords | ||||
Packing machines; Metal Matrix Composite Materials; ANSYS WB; Non linearity; flexible dynamic analysis | ||||
Statistics Article View: 123 PDF Download: 226 |
||||