Measurement Techniques and Characterization of High Speed Moving Objects
Lancini, M., Amici, C., Breda, C. (2010). Measurement Techniques and Characterization of High Speed Moving Objects. EKB Journal Management System, 14(14th International Conference on Applied Mechanics and Mechanical Engineering.), 1-11. doi: 10.21608/amme.2010.37661
Matteo Lancini; Cinzia Amici; Claudio Breda. "Measurement Techniques and Characterization of High Speed Moving Objects". EKB Journal Management System, 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., 2010, 1-11. doi: 10.21608/amme.2010.37661
Lancini, M., Amici, C., Breda, C. (2010). 'Measurement Techniques and Characterization of High Speed Moving Objects', EKB Journal Management System, 14(14th International Conference on Applied Mechanics and Mechanical Engineering.), pp. 1-11. doi: 10.21608/amme.2010.37661
Lancini, M., Amici, C., Breda, C. Measurement Techniques and Characterization of High Speed Moving Objects. EKB Journal Management System, 2010; 14(14th International Conference on Applied Mechanics and Mechanical Engineering.): 1-11. doi: 10.21608/amme.2010.37661

Measurement Techniques and Characterization of High Speed Moving Objects

The International Conference on Applied Mechanics and Mechanical Engineering
Article 42, Volume 14, 14th International Conference on Applied Mechanics and Mechanical Engineering., May 2010, Page 1-11  XML PDF (454.28 K)
Document Type: Original Article
DOI: 10.21608/amme.2010.37661
View on SCiNiTO View on SCiNiTO
Authors
Matteo Lancini1; Cinzia Amici2; Claudio Breda3
1Assistant Professor - University of Brescia, Brescia, Italy.
2PhD Candidate - University of Brescia, Brescia, Italy.
3Test Manager.
Abstract
Abstract:
Response to fast speed stimuli of non linear system is difficult to predict without a proper model whose parameter has been characterized in condition closer to the working ones, because assumptions and simplifications on component stiffness and damping, such as their linearity in the frequency domain, are no longer valid. To characterize a two degrees of freedom spring-mass-damper system reacting to a high speed impact a set of statistical techniques has been developed and applied to a set of experimental measurements obtained thanks to a high speed camera, a piezoelectric load cell and a set of piezoaccelerometers. Photogrammetric position accuracy has been improved using a least square estimator of a single position from different markers, therefore position and acceleration data have been fused together being weighted on the reciprocal of their uncertainties. Starting from load, position, velocity and acceleration data, spring-mass-damper systems with different degrees of freedom have been characterized in different configurations using genetic algorithms to minimize the square deviation of prediction from measured speed, although the term to be minimized has been again weighted on reverse of uncertainty to avoid false results. Eventually the whole process has been validated and automated in order to provide a new and efficient mean of characterizing dynamic parameters such as stiffness, damping, trigger length of elastic systems impacted by high speed1 objects.
Keywords
sensor fusion; accelerometer; load cell; high speed camera; Genetic Algorithms; uncertainty; Least Square
Statistics
Article View: 107
PDF Download: 188