ROLLING PROCESS SIMULATION USING A DEVELOPED EULERIAN FORMULATION | ||||
| The International Conference on Applied Mechanics and Mechanical Engineering | ||||
| Article 134, Volume 13, 13th International Conference on Applied Mechanics and Mechanical Engineering., May 2008, Page 260-272 PDF (283.46 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/amme.2008.39800 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| BAYOUMI H. N. | ||||
| Lecturer, Mechanical Design & Production Dept., Cairo University, Giza, Egypt. | ||||
| Abstract | ||||
| ABSTRACT In this paper, an Eulerian formulation is developed from the more general Arbitrary Lagrangian Eulerian (ALE) formulation and is used in rolling process simulation. Starting from the basic principles of continuum mechanics, a consistent ALE formulation is derived. An Eulerian formulation is then obtained by fixing the finite element mesh in space. A finite element program based on the Eulerian formulation has been developed. The program is used to simulate a steady state rolling process. The roll pressure distribution is compared with published experimental results. Comparisons reveal the effectiveness of the developed formulation. | ||||
| Keywords | ||||
| Finite Element Analysis; Eulerian formulation; rolling process | ||||
|
Statistics Article View: 86 PDF Download: 159 |
||||
