The Optimum Types and Characteristics of Drilling Fluids Used During Drilling in The Egyption Westren Desert | ||||
Journal of Petroleum and Mining Engineering | ||||
Article 10, Volume 20, Issue 1 - Serial Number 130, 2018, Page 89-100 PDF (978.16 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/jpme.2018.40453 | ||||
View on SCiNiTO | ||||
Authors | ||||
A. A. Elgibaly1; M. S. Farahat1; M. S. Abd El Nabbi2 | ||||
1Faculty of Petroleum and Mining Engineering, Suez University, Suez, Egypt | ||||
2Baker Hughes Inc., Egypt | ||||
Abstract | ||||
In this study, the factors that affect the selection of the types and characteristics of drilling fluids that were used while drilling nine wells in the Egyptian Western Desert were investigated. This study proves that the selection of drilling fluid type is not only based on the applications of drilling fluids, cost of drilling fluid or previous experience but also on other factors combined together such as geology of the area, potential problems for each section, make up base fluids availability, waste management techniques, environmental regulations, rig and drilling equipments and drilling data. In this study also, the evaluation of the designed characteristics of the selected types of drilling fluids was made to achieve the required functions such as good hole cleaning, well control, hole stability and to reduce lost circulation problem. | ||||
Keywords | ||||
Wellbore stability; stuck pipe; pack off; water base drilling fluids; oil base drilling fluids | ||||
Statistics Article View: 797 PDF Download: 2,924 |
||||