Flexural Strength of Milled Cobalt Chromium Versus Stainless Steel 1.4404/316L alloy: An In Vitro Study | ||||
| Minia Journal of Medical Research | ||||
| Articles in Press, Accepted Manuscript, Available Online from 09 February 2025 | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjmr.2025.355383.1886 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Haitham Mohsen Abdel-aal 1; Iman Adel Elasfhany 2; Ereny Eshak Ghaly  3
| ||||
| 1faculty of dentistry/department of removable prosthodontic/Minia university | ||||
| 2Department of removable prosthodontics , minia university | ||||
| 3Removable prosthodontics department faculty of dentistry minya university | ||||
| Abstract | ||||
| Abstract: Aim: This in vitro study evaluates the flexural strength of milled stainless steel 1.4404/316L alloy bars versus milled cobalt chromium alloy bars using a three-point bending machine.The research compares the mechanical properties of these two materials, which are commonly used in bar frameworks for overdentures, particularly for edentulous patients. Methods: Twenty bars , split equally between cobalt chromium alloy bars (n=10 ) and stainless steel 1.4404/316L alloy bars (n=10), were fabricated and tested in a simulated clinical setting. Flexural strength was assessed through a three-point bending test. Results: The cobalt chromium alloy bars exhibited significantly higher flexural strength (2419.71 ± 15.36 MPa) compared to stainless steel 1.4404/316L alloy (1017.29 ± 13.50 MPa), with a statistically significant difference (P < 0.0001). Conclusion: Within the limitations of this study the cobalt chromium alloy may provide a superior flexural strength compared to stainless steel 1.4404/316L alloy. Keywords: Cobalt Chromium, Flexural Strength, Stainless Steel. | ||||
| Keywords | ||||
| Cobalt Chromium; Flexural Strength; Stainless Steel | ||||
|
Statistics Article View: 115 |
||||
