Effect of Si and EC plasticizer on the ionic conductivity enhancement of (PVA). (NaHSO4) 0.5 solid polymer electrolyte | ||||
The Arab Journal of Scientific Research | ||||
Article 2, Volume 1, Issue 1, 2017, Page 8-15 PDF (508.4 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/ajsr.2017.42944 | ||||
![]() | ||||
Authors | ||||
Sh.I. Elkalashy1; E. Sheha2; W. A. Ghaly* 1; M.K. El-Mansy2; A. I. Helal1 | ||||
1Central Lab. for Elemental & Isotopic Analysis, NRC, AEA, Egypt | ||||
2Physics Department, Faculty of Science, Benha University, Benha, Egypt | ||||
Abstract | ||||
Solid polymer electrolyte (SPE) is synthesized by solution casting technique. SPE uses poly (vinyl alcohol) PVA as a host matrix doped with solid acid NaHSO4, ethylene carbonate (EC) as plasticizer and (Si) as filler. Polymer electrolytes are characterized by Impedance Spectroscopy (IS) to determine the composition of the additive which gives the highest conductivity for each system at room temperature. The ionic conductivity of the polymer electrolytes increases with temperature and obeys the Arrhenius law. X-ray diffraction (XRD) studies indicate that the conductivity increase is due to an increase in amorphous content which enhances the segmental flexibility of polymeric chains and the disordered structure of the electrolyte. Scanning electron microscopy (SEM) images show the changes morphology of solid polymer electrolyte. A magnesium battery has been fabricated with optimized composition (3.75wt. % Si) polymer electrolyte using FeS2 as electrode which gives real capacity 112 mAh/g and has an internal resistance of 160Ω. | ||||
Keywords | ||||
Solid Polymer Electrolyte; Ethylene Carbonate; Si; Ionic conductivity | ||||
References | ||||
[1] Aurbach D, Gofer Y, Z.Lu, schechter A , chusid O, H. Gizbar, Cohen Y, Ashkenazi V, Turgeman R , Levi E. A short review on the comparion between Li battery systems and rechargeable magnesium battery technology. J. power sources 2001 ;( 97-98): 28-32.
[2] Sun Oh Ji, Myoun Ko Jang, Won Kim Dong. Preparation and characterization of gel polymer electrolytes for solid state magnesium batteries. J.Electrochimica Acta. Acta 2004 ; 50 (903–906):
[3] Sheha E. Prepartion and physical properties of (PVA) 0.75 (NH4Br)0.25(H2SO4)xM solid acid membrane J. Non-Crystalline Solids 2010; 356: 2282-2285.
[4] Mohamad A A and Arof A K. Plasticized alkaline solid polymer electrolyte system. J. Material Letters 2007; 61: 3096-3099.
[5] Ratner M A, Polymer Electrolyte Reviews1, J.R. Maccallum and C.A.Vincent, p.173, Elsevier Appl. Science, London 1987.
[6] Krawiec W, Jr Scanlon L G, Fellner j p , Vaia R A , Vasudevan S , Giannelis E P. Polymer nanocomposites: a new strategy for synthesizing solid electrolytes for rechargeable lithium batteriesPolymer nanocomposites: a new strategy for synthesizing solid electrolytes for rechargeable lithium batteries J. Power Sources 1995 ; 54: 310-315.
[7] Hodge M R, Edward, Graham H, Simon G P, Water absorption and states of water in sernicrystalline poly(vinyl alcohol) films J. Polymer 1996; 37: 1371-1376.
[8] Pejova B and Grozdanov I ,Three-dimensional confinement effects in semiconducting zinc selenide quantum dots deposited in thin-film form J. Material Chemistry and Physics 2005 ; 90: 35-46.
[9] Suman C K, Yun J, Kim S, Lee Sin-Doo, Lee Changee, AC impedance spectroscopic studies of transport properties in metal oxide doped α-NPD J. Current applied Physics. 2009; 9: 978-984.
[10] Subban R H Y, Arof A K Plasticiser interactions with polymer and salt in PVC–LiCF3SO3–DMF electrolytes J. European polymer 2004;40: 1841-1847.
[11] Majid S R, Arof A K, FTIR Studies of Chitosan-Orthophosphoric Acid-Ammonium Nitrate-Aluminosilicate Polymer Electrolyte J. Molecular. Crystal. Liquid Crystal 2008; 484: 117-126.
[12] Sheha E. Ionic conductivity and dielectric properties of plasticized PVA0.7(LiBr)0.3(H2SO4)2.7M solid acid membrane and its performance in a magnesium battery J. Solid State Ionics 2009 ;180: 1575-1579.
[13] Sheha E, El-Mansy M K. A high voltage magnesium battery based on H2SO4-doped (PVA)0.7(NaBr)0.3 solid polymer electrolyte J. power sources 2008;185: 1509-1513.
[14] Awadhia A, Patel S K, Agrawa S L. Dielectric investigations in PVA based gel electrolytesJ. Progress in Crystal Growth and Characterization of Materials . 2006; 52: 61-68.
[15] Ramesh S, Yahaya A H, Arof A K. Dielectric behaviour of PVC-based polymer electrolytes J. Solid State Ionics 2002; 152-153: 291-294.
[16] Cui N, Luo J L. Effects of oxide additions on electrochemical hydriding and dehydriding behavior of Mg2Ni-type hydrogen storage alloy electrode in 6 M KOH solution J. Electrochimica Acta 1998; 44: 711-720.
[17] Catherino A H, Feres F F, Trinidad F. Sulfation in lead–acid batteries J. Power Sources 2004; 129: 113-120. | ||||
Statistics Article View: 288 PDF Download: 315 |
||||