A Review on Reinforced Concrete Beam-Column connections | ||||
The International Conference on Civil and Architecture Engineering | ||||
Article 6, Volume 11, 11PthP International Conference on Civil and Architecture Engineering, April 2016, Page 1-27 PDF (738.53 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/iccae.2016.43415 | ||||
![]() | ||||
Authors | ||||
Ahmed Asran1; Hasan Al-Esnawy2; Sabry Fayed3 | ||||
1Prof. of Concrete Structures, Faculty of Engineering, Azhar University, Egypt. | ||||
2Associate Professor. civil Engineering Department, Faculty of Engineering, Azhar University, Egypt. | ||||
3Assistant lecturer, civil Engineering Department, kafrelkhiesh University , Egypt. | ||||
Abstract | ||||
Abstract: A beam-column joint is a very critical zone in reinforced concrete framed structure where the elements intersect in allthree directions.There are practical difficulties involved in theconstruction of reinforced beam-column joints.In this review to focus on the general behaviour of reinforced concrete Beam-Column joints (BCJ); exterior, interior and at top floor. Previous research work presented studying BCJ under gravity and seismic loads in addition to the effect of many parameters on the mechanical behaviour of BCJ. The current study investigated the effect of reinforcement configuration, eccentricity, the joint aspect ratio (hRbR/hRcR), concrete compressive strength, and the compressive column axial load.BCJ classification was introduced according to ACI 318-02 (2002) and Egyptian code (2007). The equations and recommendations related with BCJ in national codes were reviewed. | ||||
Keywords | ||||
Strength,Ductility, Stiffness, Reinforced Concrete beam-column connection, Exterior joint, interior joint, Anchorage,cyclic loading; energy dissipation, hysteresis model,shear strength, nonseismic design,seismic design, national codes | ||||
Statistics Article View: 269 PDF Download: 3,687 |
||||