Carbon Nanotubes as Superior Sorbent for Removal of Phenol from Industrial Waste Water | ||||
| Egyptian Journal of Chemistry | ||||
| Article 7, Volume 61, Issue 1, January and February 2018, Page 75-84 PDF (1.68 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2017.1756.1149 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Carmen Elshafiee  1; Mohamed Abdel-salam1; Sayed Moalla2; Hager Ali1; Doaa Osman1; Renee Abdalla1; Yasser Moustafa1
| ||||
| 1Egyptian Petroleum Research Institute. P.o. Box 11727, Nasr City, Cairo, Egypt | ||||
| 2Faculty of Science, Port said University, Egypt | ||||
| Abstract | ||||
| Organic pollutant substances have direct effect on humans and animals. Wastewater containing organic pollutant like phenol compound can contaminate ground water resource and thus lead to a serious ground water problem. This study present the adsorption technique of (MWCNTs) which is used as adsorbents for the removal of phenol compounds from synthetic contaminated water. Many parameters are studied like pH, agitation speed, contact time and adsorbent concentration to determine their influence on the removal of phenol and on adsorption rate .The concentration of phenol in water before and after treatment was determined (analyzed) using high performance liquid chromatography technique (HPLC).The kinetic studies for adsorption followed the pseudo-second order model. The adsorption isotherm fit with Langmuir isotherm. The optimum conditions using MWCNTs were contact time 120 min, pH 7, agitation speed 130 rpm and dose of adsorbent 0.3 g. The removal percentage was 85.54%. | ||||
| Keywords | ||||
| carbon nanotubes; adsorbent materials; Phenolic compounds; industrial waste water; agitation; kinetic adsorption | ||||
|
Statistics Article View: 817 PDF Download: 614 |
||||
