Improvement Properties of EPDM Rubber Using Hybrid Chitin/Clay Filler for Industrial Products | ||||
| Egyptian Journal of Chemistry | ||||
| Article 11, Volume 63, Issue 1, January 2020, Page 129-143 PDF (2.27 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2019.12736.1788 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Aman I Khalaf  1; Fahima M Helaly 2; Sanaa El Sawy3
| ||||
| 1Dr. Aman Ibrahim Khalaf Polymers and Pigments Dept. National Research Center Dokki, Cairo, Egypt Mobile: +20124342459 | ||||
| 2Polymers and Pigment, National Research Centre, Cairo | ||||
| 3Polymers and Pigments, National Research Centre, Giza, Egypt | ||||
| Abstract | ||||
| This work deals to synthesis chitin from Shrimp shells, that were collected from the local market scraped, washed, and ground. Deproteinization and decalcification process were applied on the ground shells to obtain pure chitin that identified and characterized by FTIR spectra, thermogravimetric analysis and scanning electron microscope SEM. The rubber compounds were prepared by incorporation of chitin as biomaterial and the other additive as curative system in ethylene propylene diene monomer (EPDM) rubber matrix using the laboratory two-roll mill. The rheological characteristics were tested using oscillating disc rheometer. The physico-mechanical properties of the prepared rubber vulcanizates before and after exposure to thermal oxidative ageing swelling properties, water uptake and chitin dispersion in rubber were investigated. It was found that at 5 phr of chitin the value of tensile strength of EPDM/chitin vulcanizates has higher value than the other concentrations of chitin. While the modulus at 50 % elongation and hardness increased with increasing chitin concentration. The samples containing 5 and 10 phr chitin show good thermal stability. Also, the effect of nanoclay concentration (3,5,7 and 10 Phr) as binary hybrid filler properties of EPDM rubber were evaluated. It was observed that, the rheological characteristics and the physico-mechanical properties were improved due to apply nanoclay as binary hybrid filler with chitin. | ||||
| Keywords | ||||
| EPDM; chitin; nanoclay; binary hybrid; Physico-mechanical properties | ||||
|
Statistics Article View: 592 PDF Download: 490 |
||||
