EXPERIMENTAL AND ANALYTICAL BEHAVIOR OF ECONOMICALLY REACTIVE POWDER REINFORCED CONCRETE BEAMS | ||||
| The International Conference on Civil and Architecture Engineering | ||||
| Article 10, Volume 10, 10th International Conference on Civil and Architecture Engineering, May 2014, Page 1-15 PDF (749.83 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/iccae.2014.44091 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Nageh N. Meleka1; Alaa A. Bashandy1; Mohamed A. Arab2 | ||||
| 1Department of Civil Engineering, Faculty of Engineering, Menoufia University, Egypt. | ||||
| 2Department of Civil Engineering, Faculty of Engineering, Banisweef University, Egypt. | ||||
| Abstract | ||||
| ABSTRACT A study for the load deflection behavior of reinforced beams cast using reactive powder concrete RPC–as an ultra high strength concrete type- was executed experimentally and analytically. The experimental program was carried out to study the effect of cement content, using steel fiber and using two types of reinforcement. Results show positive effect on cracking and ultimate loads of reactive concrete beams due to increasing of the cement content. The ductility of the reactive concrete beams is increased by using steel fibers. An analytical study was performed using a nonlinear computer program based on finite element technique. A comparison between analytical and experimental results was carried out to evaluate the efficiency and the accuracy of the used nonlinear computer program. The computer program results were practically close enough to the experimental results. The numerical analysis with the chosen finite element technique presented a good simulation to the RPC beams. | ||||
| Keywords | ||||
| Reactive Powder Concrete; Ultra High Strength Concrete; Cement Content; Steel Fibres; Reinforcement type; Nonlinear Computer Program; Beam | ||||
|
Statistics Article View: 148 PDF Download: 202 |
||||
