Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil
El-Shesheny, A., Nagy, N., Belal, A., Badawy, A. (2014). Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil. EKB Journal Management System, 10(10th International Conference on Civil and Architecture Engineering), 1-11. doi: 10.21608/iccae.2014.44109
Ahmed El-Shesheny; Nabil Nagy; Adel Belal; Ahmed Badawy. "Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil". EKB Journal Management System, 10, 10th International Conference on Civil and Architecture Engineering, 2014, 1-11. doi: 10.21608/iccae.2014.44109
El-Shesheny, A., Nagy, N., Belal, A., Badawy, A. (2014). 'Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil', EKB Journal Management System, 10(10th International Conference on Civil and Architecture Engineering), pp. 1-11. doi: 10.21608/iccae.2014.44109
El-Shesheny, A., Nagy, N., Belal, A., Badawy, A. Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil. EKB Journal Management System, 2014; 10(10th International Conference on Civil and Architecture Engineering): 1-11. doi: 10.21608/iccae.2014.44109

Finite Element Analysis of Square Footing Resting on Geosynthetic Reinforced Soil

The International Conference on Civil and Architecture Engineering
Article 15, Volume 10, 10th International Conference on Civil and Architecture Engineering, May 2014, Page 1-11  XML PDF (382.61 K)
Document Type: Original Article
DOI: 10.21608/iccae.2014.44109
View on SCiNiTO View on SCiNiTO
Authors
Ahmed El-Shesheny1; Nabil Nagy2; Adel Belal3; Ahmed Badawy4
1Civil Eng. Department, Military Technical College – Cairo, EGYPT.
2Assoc. Prof. in Civil Eng. Department, Military Technical Collage – Cairo, EGYPT.
3Prof. Dr. in Arab Academy for Science, Technology and Maritime Transport.
4Mechanical Eng. Department, Military Technical Collage – Cairo, EGYPT.
Abstract
ABSTRACT Bearing capacity of soil is considered an important parameter at which the soil can resist loads above it. Different ways are used to improve the bearing capacity of weak soils. One of the used techniques is the soil reinforcing technique. In this study, the results of numerical simulations on square footings resting on geosynthetic reinforced sand are presented. In order to predict the improvement in the bearing capacity resulting from the usage of the reinforcing layers in the sand, finite element analysis package ANSYS is used. Nonlinear Drucker-Prager's model is used as material model to simulate the soil and Linear Isotropic model is used as material models to simulate the reinforcing layers and the footing respectively. SOLID45 element is used as element type to simulate the soil and the footing and Link8 is used as element type to simulate the reinforcing layers. Numerical model of 150mm x 150mm x 25mm is used to simulate the square footing and model of 900mm x 900mm x 600mm is used to simulate the soil. Under the effect of both static and dynamic loading two main effective parameters are discussed in this study. The investigated parameters are the number of the reinforcing layers and the depth of the reinforced zone which includes the variation of spacing between the reinforcing layers. The bearing capacity improvement investigation is analyzed.
Keywords
Geosynthetic reinforcement; Numerical modelling; Reinforced soil; Square footing
Statistics
Article View: 151
PDF Download: 255