Up-grading of Locally Produced Metallurgical Grade Silicon (MG-Si) | ||||
| Egyptian Journal of Chemistry | ||||
| Article 14, Volume 61, Issue 1, January and February 2018, Page 155-161 PDF (1.37 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2017.2074.1171 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Heba Hussein Ali  1; Mohamed Hussein El-Sadek2; Mohamed Morsi2; Kamilia El-Barawy2; Rabab Abou-Shahba3
| ||||
| 1Minerals Technology Department – Pyrometallurgy Lab., Central metallurgical Rsearch & Development Institute (CMRDI) | ||||
| 2Minerals Technology Department – Pyrometallurgy Lab., Central metallurgical Rsearch & Development Institute (CMRDI) | ||||
| 3Physical Chemistry , Faculty of Science(Girls), Al-Azhar University | ||||
| Abstract | ||||
| Locally produced metallurgical grade silicon (MG-Si ~ 97%) was upgraded by using wet-milling process. This is including milling of MG-Si in presence of 2M HCl solution for different time periods up to 60 min. The effect of milling time in HCl solution was studied. Soaking of the milled products (at optimum milling time 15 min) with continuous stirring in the same solution of 2M HCl for interval time up to 240 min also were investigated. Finally, the effect of addition of 2M HF to the milled product was discussed. The leached samples were investigated by X-ray fluorescence (XRF), and scanning electron microscope (SEM). It was found that, 99.92% purity of MG-Si was achieved after 15 min milling time with 2M HCl followed by addition 2M HF for 240 min with continuous stirring. About 97 % removal efficiency of the impurities was obtained. | ||||
| Keywords | ||||
| MG-Si; up-grading of MG-silicon; purification of silicon; acid leaching | ||||
|
Statistics Article View: 487 PDF Download: 454 |
||||
