DEVELOPMENT OF A PICKUP BALER FOR CHOPPING AND COMPRESSING CROP RESIDUES FOR PROCESSING NON-CONVENTIONAL FORAGES | ||||
| Journal of Soil Sciences and Agricultural Engineering | ||||
| Article 5, Volume 4, Issue 4, April 2013, Page 375-389 PDF (818.9 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/jssae.2013.51881 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A. F. A. Abdrabo1; S. El. Abdalh2 | ||||
| 1Res. Agric. Eng. Res. Institute. Nadi Elsaid St. Dokki | ||||
| 2Ag.Eng.Dept., faculty of Ag.,Kafr El- Sheikh University | ||||
| Abstract | ||||
| The aim of this study is to develop a John Deere Pickup Baler for chopping and compressing rice straw and stalks of wheat for Processing non-conventional Forages .This study was conducted by using a develop John Deere Pickup Baler to show the effect of straw moisture content and stalks of wheat are (36.0, 30.0,24.0 and 16.0 %), (28.0,25.0,22.0 and 18.0%) respectively ,machine forward speed (1.8,2.3,3.5 and 4.4 km/h) and different knives speed (18.0, 20.0, 23.0, and 26.0 m/s) on lengths of cut, Efficiency of straw bales, effective field capacity, energy requirements and unit cost .The results indicated that increase the forward speed from (1.8 to 4.4 km/h) at knives speed 26.0 m/se and straw rice moisture content of 30%, stalks of wheat.25.0%, w.b respectively tends to decrease lengths of cut of straw rice from (63.0 to 32.0 mm) and ( 60.0 to 28.0 mm) from stalks of wheat ,increasing effective field capacity from (0.61 to 1.14 and 0.655 to 1.4 fed/h.) respectively , decreasing energy required from (60.65 to 32.457 and 56.92 to 26.42 Kw.h/fed respectively) and decreasing unit cost from (87.06 to 46.58 and 81.7 to 37.93 LE/fed.), respectively. Also, straw moisture content of 36.0 % and stalks of wheat 28.0 %w.b. gave the highest values of chopping length, Efficiency of straw bales, energy requirements and unit cost at forward speed 1.8 km/h and knives speed 18 m/se | ||||
|
Statistics Article View: 124 PDF Download: 242 |
||||
