THE PREDICTION OF THE CUTTING EFFICIENCY FOR TURNING OPERATIONS | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 45, Volume 1, 2nd Conference on Applied Mechanical Engineering., May 1986, Page 43-50 PDF (1.91 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.1986.52162 | ||||
View on SCiNiTO | ||||
Authors | ||||
M. S.M. Riad1; A. M.A. Moussa2; G. H.S. Badawy3 | ||||
1Associate Professor, Mechanical Design and Production Department, Cairo University, Egypt. | ||||
2Associate Professor, Production Engineering Department, helwan University, Egypt. | ||||
3Graduate Student, Production Engineering Department, helwan University, Egypt. | ||||
Abstract | ||||
A series of machining experiments were conducted on steel specimens, and the effect of various machining parameters on cutting forces are presented. Empirical formulae for the estimation of the cutting forces, as functions of the cutting conditions, were deriven. The term "Cutting Efficiency" is introduced, and could be considered as a measure of the performance of the cutting system. An empirical formula for the prediction of the cutting efficiency was established, and it could be used in optimization techniques. | ||||
Keywords | ||||
Metal cutting; Machining; cutting forces; specific cutting energy; cutting efficiency | ||||
Statistics Article View: 81 PDF Download: 151 |
||||