MANUFACTURE AND PERFORMANCE EVALUATION OF A LOCAL HARVESTING MACHINE FOR SILAGE PREPARATION | ||||
| Zagazig Journal of Agricultural Research | ||||
| Article 23, Volume 44, Issue 5, September 2017, Page 1873-1887 PDF (365.54 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/zjar.2017.52267 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Ashraf S.E. Ali  ; M. El-Shazly; M. M. Morad
| ||||
| Agric. Eng. Dept., Fac. Agric., Zagazig Univ., Egypt | ||||
| Abstract | ||||
| The present research was carried out to manufacture and evaluate the performance of a local silage-harvesting machine to improve harvesting efficiency. The manufactured machine consists mainly of frame, hitching device, transmission system, harvesting device and power source. The manufactured machine performance was studied as a function of change in machine forward speed, knife velocity, knife inclination angle and stalk moisture content. Performance evaluation was conducted in terms of field capacity and field efficiency, harvesting losses and harvesting efficiency, required power, energy requirements and criterion cost. The experimental results revealed that harvesting losses as well as criterion costs were minimum while harvesting efficiency was maximum under the following conditions: Operate the machine at a forward speed of 2.5 km/hr. Operate the harvesting device at a knife velocity of 1250 rpm. Adjust knife inclination angle at zero degree. Harvest silage at a stalk moisture content of about 69% (wb). | ||||
| Keywords | ||||
| Harvesting machine; silage production; knife velocity; Energy requirements | ||||
|
Statistics Article View: 125 PDF Download: 216 |
||||
