Model Identification of Displacement Controlled Linear Actuator in Hydraulic System | ||||
| Journal of Engineering Science and Military Technologies | ||||
| Article 4, Volume 2, Issue 1, January 2018, Page 31-35 PDF (1.11 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejmtc.2017.1415.1057 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Sherif Abdel Fattah Elbaz  1; Moatasem Shahin2; Nabela El-Nahhas3; Mohamed Abdel-Aziz4
| ||||
| 1Automotive Engineering Department, Ain-Shams University, Egypt. | ||||
| 2Mechanical Department, Military Technical College, Cairo, Egypt | ||||
| 3Automotive Engineering Department | ||||
| 4Automotive Engineering Department, Ain-Shames University | ||||
| Abstract | ||||
| The main goal of this paper is to develop and validate the system identification of the Displacement Controlled (DC) linear hydraulic system. The proposed method depends on finding the transfer function that map the simulated output to fit the actual output. To achieve this goal, several experiments have been performed to collect the required data to estimate the parameters including the order of the estimated transfer function. Experimental results in this paper demonstrate that fifth order model with one zero shows good match between the simulated out and the actual outputs. These results demonstrate that the proposed approach can achieve accurate identification of DC linear hydraulic system. Moreover, the proposed approach is general and can be applied to model any hydraulic system working in the linear zone. | ||||
| Keywords | ||||
| Displacement controlled linear actuator; Hydraulic system; Modelling; pseudo random binary signal; Transfer function | ||||
|
Statistics Article View: 839 PDF Download: 569 |
||||
