Effect of electromagnetic stirring on the solidification morphology and mechanical properties of Al — alloys. | ||||
The International Conference on Applied Mechanics and Mechanical Engineering | ||||
Article 45, Volume 2, 2nd Conference on Applied Mechanical Engineering., May 1986, Page 225-236 PDF (1.98 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/amme.1986.57096 | ||||
View on SCiNiTO | ||||
Authors | ||||
Ashraf M. Mohsen1; M. Sultan2; M. El—Salamoni3 | ||||
1Faculty of Engineering — Cairo University. | ||||
2Military Technical College | ||||
3Faculty of Engineering — Cairo University | ||||
Abstract | ||||
Three different Al-alloys were solidified in metallic molds under the application of magnetic field and direct current with the aim of improving its structure and mechanical properties. The results obtained from these experiments indicate that increasing the stirring power causes a remarkable grain refinement and improvement in the mechanical properties. The stirring force which was created from the the interaction between a magnetic filed of 1860 causes and a direct current of 230 amperes, Improves the ultimate tensile strength of the commercial pure Al( 99.5% ) by about 20% and its hardness by 42%. Corresponding values were (615 and 30%) and (62% and 25%) for the Al-4.3% Cu and the Al-11.7% Si alloys respectively. This improvement is most probably due to crystal multiplication and dendritic arms shearing. | ||||
Statistics Article View: 70 PDF Download: 149 |
||||