- 1. Simonsen RJ. Pit and fissure sealant: review of the literature. Pediatr Dent. 2002; 24: 393-414.
- Tyas MJ, Anusavice KJ, Frencken JE, Mount GJ. Minimal intervention dentistry--a review. FDI Commission Project 1-97. Int Dent J. 2000; 50: 1-12.
- Simonsen RJ. Chapter 2: Pit and fissure sealants. In: Clinical Applications of the Acid Etch Technique. 1st ed. Chicago, IL: Quintessence Publishing Co, Inc; 1978:19-42.
- Siegal MD. Workshop on guidelines for sealant use. J Publ Health Dent. 1995; 55: 259-311.
- Coronal SAM, Borsatto MC, Garcia L, Ramos RP, PalmaDibb RG. Randomized controlled trial comparing the retention of a flowable restorative system with a conventional resin sealant: one year follow up. Int J Paediatr Dent. 2005; 15: 44-50.
- Pérez LL, Cortés LO, García BC, Cózar HA. Marginal microleakage of the fissure sealants: a comparative study. J Dent Child. 2003; 70: 24-8.
- Feigal RJ, Quelhas I. Clinical trial of a self-etching adhesive for sealant application: success at 24 months with Prompt L-Pop. Am J Dent. 2003; 16: 249-51.
- Beauchamp J, Caufield W, James J, Caufield PW, Crall JJ, Donly K, et al. Evidence-based clinical recommendations for the use of pit-and-fissure sealants a report of the American Dental Association Council on scientific affairs. JADA. 2008; 139: 257-68.
- Tavassoli SH, Mehran M, Noori ET, Hedeshi RM. Effect of Self-Etching and Single-Bottle Bonding Systems on Shear Bond Strength of Fissure sealant to Primary and Permanent Enamel. JIDAI. 2014; 26: 6-12.
- Mascarenhas AK., Nazar H., Al-Mutawaa S, Soparkar P. Effectiveness of primer and bond in sealant retention and caries prevention. Pediatr Dent. 2008; 30: 25-8.
- Papacchini F, Goracci C, Sadek FT, Monticelli F, Garcia GF, Ferrari M. Microtensile bond strength to ground enamel by glass-ionomers, resin-modified glass-ionomers, and resin composites used as pit and fissure sealants. J Dent. 2005; 33: 459-67.
- Margvelashvili M, Vichi A, Carrabba M, Goracci C, Ferrari M. Bond Strength to Unground Enamel and Sealing Ability in Pits and Fissures of a New Self-Adhering Flowable Resin Composite. J Clin Pediatr Dent. 2013; 37: 397-402.
- Vichi A, Margvelashvili M, Goracci C, Papacchini F, Ferrari M. Clinical study of the self-adhering flowable composite resin Vertise Flow in Class I restorations: sixmonth follow-up. Int Dent SA. 2010; 12: 14-23.
- Czasch P, Ilie N. In vitro comparison of mechanical properties and degree of cure of a self-adhesive and four novel flowable composites: J Adhes Dent. 2013; 15: 229- 36.
- Alsaleh MM. Clinical and laboratory evaluation of flowable composite as pit and fissure sealing material used on permanent molars. MD thesis. Alexandria University Egypt. 2009.
- Moszner N, Salz U, Zimmermann J. Chemical aspects of self-etching enamel-dentin adhesives: a systematic review. Dent Mater. 2005; 21: 895-910.
- Eliades A, Birpou E, Eliades T, Eliades G. Self-adhesive restorations as pit and fissure sealants: A comparative laboratory study. Dent Mater. 2013; 29:752-62.
- Sharaf A. The use of a self-etching adhesive in the application of pit and fissure sealant: an in vivo and in vitro study. Egy Dent J. 2003; 49: 1319-26.
- Juloski J, Goracci C, Rengo C, Giovannetti A, Vichi A, Vulicevic ZR, et al. Enamel and dentin bond strength of new simplified adhesive materials with and without preliminary phosphoric acid-etching. Am J Dent. 2012; 25: 239-43.
- Pardi V, Sinhoreti MA, Pereira AC, Ambrosano GM, Meneghim Mde C. In Vitro Evaluation of Microleakage of Different Materials Used as Pit and Fissure Sealants. Braz Dent J. 2006; 17: 49-52.
- Yavuz I, Aydin AH, Ulku R, Dulgergil TC, Akdag MZ. New technique: Measurement of microleakage volume in the marginal gaps of the dental restorations. Biotechnol Biotech Equip. 2005; 19: 184-91.
- Ovrebo RC, Raadal M. Microleakage in fissures sealed with resin or glass ionomer cement. Scand J Dent Res. 1990; 98: 66-9.
- IBM SPSS Statistics for Windows, Version 21.0. Armonk, NY: IBM; 2012.
- Garcia N, Morelli E, Silva D, Giongo M, Pollheim P, Largura S, et al. Bonding performance of a self-adhering flowable composite to substrates used in direct technique. RSBO. 2013; 10: 143-9.
- Gonulol N, Ertas E, Yilmaz A, Cankaya S. Effect of thermal aging on microleakage of current flowable composite resins. JDS. 2014; 3: 1-7.
- Pipatphatsakorn M. Microtensile bond strength of new selfadhesive flowable resin composite, Vertise® Flow™, on Different Enamel Substrates. CU Dent J. 2015; 38: 83-96.
- Technical Bulletin/Vertise Flow Self Adhering Flowable Composite.Orange, CA, USA: Kerr Sybron Dental Specialties, 2010.
- Ernst CP. Positioning self-etching adhesives: versus or in addition to phosphoric acid etching. J Esthet Restor Dent. 2004; 16: 57-69.
- Erhardt MC, Cavalcante L, Assad M, Pimenta LA. Influence of Phosphoric Acid Pretreatment on Self-Etching Bond Strengths. J Esthet Restor Dent. 2004; 16: 33-40.
- De Munck J, Van Landuyt K, Peumans M, Poitevin A, Lambrechts P, Braem M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res. 2005; 84: 118-32.
- Derelioglu SS, Yilmaz Y, Celik P, Carikcioglu B, Keles S. Bond strength and microleakage of self-adhesive and conventional fissure sealants. Dent Mater J. 2014; 33: 530- 8.
- Raskin A, Tassery H, D’hoore W, Gonthier S, Vreven J, Degrange M, et al. Influence of the number of specimens on the reliability of in vitro microleakage evaluations. Am J Dent. 2003; 6: 207-10.
- International Organization for Standardization. Dental Materials-Testing of adhesion to tooth structure. ISO/TS 11405; 2015.
- Wei J, Silikas N, Zhang ZT, Watts C. Hygroscopic dimensional changes of self-adhering and new resin-matrix composites during water sorption/desorption cycles. Dent Mater. 2011; 27: 259-66.
- Guelmann M, Bonnini S, Primosch RE, Soderholm KJ. Microleakage and wall adaptation of conservative restorations. Am J Dent. 2002; 15: 407-11.
- ElMotyam K, Walid A, Youssef R. Assessment and comparison of nanoleakage and resin tag length of three different pit and fissure sealants: An In-vitro scanning electron microscope study. J Am Sci. 2013; 9: 329-37.
|