EFFECT OF PAYLOAD PARAMETERS ON THE DYNAMIC PERFORMANCE OF HEAVY VEHICLES | ||||
| International Conference on Aerospace Sciences and Aviation Technology | ||||
| Article 109, Volume 10, 10th International Conference On Aerospace Sciences & Aviation Technology, May 2003, Page 1033-1050 PDF (2.35 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/asat.2001.59797 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| HOSAM EL-DEEN Y. H.1; EL-HADDAD M. A.2; SHARAF A. M.3 | ||||
| 1Professor, Higher Technological Institute, Tenth of Ramadan City, EGYPT. | ||||
| 2Associate Professor, Egyptian Armed Forces. | ||||
| 3Teacher assistant, Egyptian Armed Forces. | ||||
| Abstract | ||||
| Nowadays the articulated heavy vehicles play an economically important role in the transportation process, and their numbers have been increasing for several decades. In the military field, the demand of transporting combat equipment that are characterized by unconventional weights and dimensions, necessitates using unconventional transporters. The payload parameters effect on the dynamic performance of heavy articulated vehicles is of a prime of interest. In this paper parametric study is carried out to investigate the effect of payload parameters (density, and C.G height) during different low and high-speed maneuvers using yaw/roll model, which is developed by the University of Michigan Transportation Research Institute, UMTRI. The study shows that there may exist two loading cases that having equal payload weight but with different densities and accordingly different C.G. heights. In the case of higher C.G., the dynamic rollover stability and yaw stability are reduced. Accordingly regulation laws must limit the C.G. height as with the limitation on axle loads, (i.e. axle load only is not enough limit). | ||||
| Keywords | ||||
| Articulated vehicle; tractor-semitrailer; and vehicle dynamic simulation | ||||
|
Statistics Article View: 90 PDF Download: 174 |
||||
