ESTIMATION OF INDUCTION MOTOR MODEL PARAMETERS - CASE STUDY | ||||
| ERJ. Engineering Research Journal | ||||
| Article 1, Volume 42, Issue 3, July 2019, Page 177-182 PDF (504.08 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/erjm.2019.66257 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mahmoud A. Al-Ahmar | ||||
| Electrical Engineering Department, Faculty of Engineering, Benha University Cairo, Egypt | ||||
| Abstract | ||||
| Modern control methods in the operation of different electrical machines are essential to develop an integrated mathematical model for the machine. The model is to calculate its inputs and outputs, which should match the performance of the machine. In order that, the model gives accurate inputs and outputs that matching the machine, it is necessary to introduce model parameters that are calculated according to machine rating as well as some laboratory measurements on the machine. In this research, a model of three phase induction motor is used to obtain the parameters of the proposed model using different methods. The calculations using that model can provide all laboratory operating results of the motor and satisfy its data sheet information. In this paper, different methods are used to estimate the parameters; curve fitting algorithm and iteration method. Accurate results of the model are obtained. The obtained results from the different methods are compared with the measured and show good agreement. Utilizing the slip-torque and slip-current motor characteristic, the estimation method is exhibited with some basic numerical illustrations. | ||||
| Keywords | ||||
| Model of Induction motor; Curve fitting, Parameter estimation, System Identification | ||||
|
Statistics Article View: 83 PDF Download: 224 |
||||
