MODELING OF A SORAR LITHIUM BRMMIDE-WATER ABSORPTION AIR CONDITIONER IN BEIRUT | ||||
| ERJ. Engineering Research Journal | ||||
| Article 3, Volume 40, Issue 1, January 2017, Page 19-24 PDF (1006.45 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/erjm.2017.66328 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. Gad El-Rab1; M. Khaled2; M. Ramadan1; A. Al Hassanieh1 | ||||
| 1Mechanical Engineering Department, School of Engineering, Lebanese International University LIU, Beirut, Lebanon | ||||
| 2Mechanical Power Engineering Department, Faculty of Engineering, Minoufyia University, Shebin El-kom, Egypt | ||||
| Abstract | ||||
| A Single-stage lithium bromide absorption chiller driven by solar water heater is investigated in this paper. In the recent study, system description, modeling and simulation are introduced for LiBr-H2O absorption air conditioning system. This system has been proposed for an apartment has about 30 kW cooling load. It is found that the obtained COP can reach up to 0.9 at absorber temperature 30°C and generator temperature around 70°C which can be obtained from an evacuated tube solar collector | ||||
| Keywords | ||||
| Solar heat source; absorption chillers; low-grade temperature; refrigeration and air conditioning | ||||
|
Statistics Article View: 166 PDF Download: 177 |
||||
