Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers
Elsayed, A., S, W., El-Azm, A. (2010). Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers. EKB Journal Management System, 20(1), 29-46. doi: 10.21608/mjeer.2010.66793
Abdulaziz Elsayed; Wageh S; Atef A. El-Azm. "Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers". EKB Journal Management System, 20, 1, 2010, 29-46. doi: 10.21608/mjeer.2010.66793
Elsayed, A., S, W., El-Azm, A. (2010). 'Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers', EKB Journal Management System, 20(1), pp. 29-46. doi: 10.21608/mjeer.2010.66793
Elsayed, A., S, W., El-Azm, A. Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers. EKB Journal Management System, 2010; 20(1): 29-46. doi: 10.21608/mjeer.2010.66793

Analytical Modeling for Optimizing Hybrid Light Emitting Device Based On Quantum Dots as Luminescent Centers

Menoufia Journal of Electronic Engineering Research
Article 9, Volume 20, Issue 1, January 2010, Page 29-46  XML
Document Type: Original Article
DOI: 10.21608/mjeer.2010.66793
View on SCiNiTO View on SCiNiTO
Authors
Abdulaziz Elsayed; Wageh S; Atef A. El-Azm
Faculty of Electronic Engineering, Menofia University, Menouf 32952, Egypt
Abstract
This paper presents an analytical model for the hybrid multilayer organic light emitting device based on quantum dots as luminance centers (QD-OLED). The device consists of a glass substrate, an anode, a hole transporting layer (HTL), a quantum dot mono-emissive layer (EML), an electron transporting layer (ETL), and a cathode. The model discusses the different processes that happened in the device: (1) The electronic charge transport process. (2) The exciton formation process and energy transfer phenomenon. (3) The out-coupling optical process via the extraction efficiency. The presented model results give guide for the optimal device structures and geometry.
References
[1]         Akira Sugimoto, et. al., "Flexible oled displays using plastic substrates," IEEE Journal of selected Topics in Quantum Electronics, 10(1), 2004.

[2]         Chih-Jen Yang, et. al., "Organic light-emitting devices integrated with solar cells: High contrast and energy recycling," J. Appl. Phys., 90, p.173507, 2007.

[3]         Seth Coe, et. al.,"Electroluminescence from single monolayers of nanocrystals in molecular organic devices" NATURE, 420 (19), p.4, 2002.

[4]         Hung-Chi Chen, et. al., "Electromagnetic modeling of organic light-emitting devices," Journal of Lightwave Technology, 24(24506), p.8, 2006.

[5]         Chih-Chien Lee, et. al., "Electrical and optical simulation of organic light-emitting devices with fluorescent dopant in the emitting layer," J. Appl. Phys., 101(11), p.11, 2007.

[6]         K. Kohary, et. al., "Modeling organic light emitting diodes incorporating nanocrystal quantum dots," J. Appl. Phys., 100, p.114315, 2006.

[7]         Li H., et al., "Computer Simulation of Transform for External Quantum Efficiency and Current Efficiency of Organic Electroluminescent Devices", in ISCIT, IEEE,2005.

[8]         Chih-Chien LEE, et. al., "Numerical simulation of electrical and optical characteristics of multilayer organic light-emitting devices," Japanese Journal of Applied Physics, 43(11A), p.6, 2004.

[9]         O.V. Mikhnenko, et. al., "Temperature dependence of exciton diffusion in conjugated polymers,"  J. Phys. Chem. B, 112, p.11601, 2008.

[10]     A. Shik, et. al., "Exciton capture by nanocrystals in a polymer matrix," J. Appl. Phys., 94(6), p.4, 2003.

[11]     M. Drndic, et. al., "Transport properties of annealed CdSe colloidal nanocrystal solids,"  J. Appl. Phys., 92(12), p.6, 2002.

[12]     N.K. Patel, et. al., "High efficiency organic light-emitting diodes," IEEE journal on Selected Topics in Quantum Electronics, 8(2), p.346, 2002.

[13]     D.S. Mehta, K. Saxena, "Light out-coupling strategies in organic light emitting devices," Proceedings of ASID-06, New Delhi, 2006.

[14]     Xue-Wen Chen, et. al., "Efficient and rigorous modeling of light emission in planar multilayer organic light-emitting diodes," Journal of display technology, 3(2), p.101, 2007.

[15]     M. Klaus, U. Scherf, "Organic Light Emitting Devices: Synthesis, Properties And Applications," 2nd edition, wiley Vch., p.410, 2006.

[16]     S. Wageh, "Raman and photoluminescence study of cdse nanoparticles capped with a bifunctional molecul," Physica E, 39, p.8, 2007.

[17]     Macleod H. A., "Thin-Film Optical Filters" 3rd Vol., S. Laurenson press, P:667, 2001.

[18]     Neil C. Greenham, et. al., "Angular Dependence of the Emission from a Conjugated Polymer Light-Emitting Diode: Implications for Efficiency Calculations," Adv. Mater., 6(6), p.4, 1994.

[19]     S.A. Crooker, et. al., "Multiple temperature regimes of radiative decay in CdSe nanocrystal quantum dots: Intrinsic limits to the dark-exciton lifetime," Appl. Phys. Lett., 82(17), p. 2793, 2003.

[20]     A. Gusso, et. al., "Modeling of organic light-emitting diodes with graded concentration in the emissive multilayer," J. Appl. Phys., 95(4), p.2056, 2004.

[21]     Palik, "Handbook of Optical Constants,", Elsevier science press(USA), P: 1073, 1991.

[22]     Yong-Jae Lee, et. al., "A high extraction efficiency nanopatterned organic light emitting diode," Appl. Phys. Lett., 82(21), p. 3779, 2003.

Statistics
Article View: 92