INTERLAMINAR SHEAR BEHAVIOR OF CROSS-PLY GFRP COMPOSITE WITH DIFFERENT OFF-AXIS ANGLES | ||||
ERJ. Engineering Research Journal | ||||
Article 9, Volume 31, Issue 2, April 2008, Page 191-199 PDF (912.94 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/erjm.2008.69533 | ||||
View on SCiNiTO | ||||
Authors | ||||
A.I. Selmy; U.A. Khashaba; I.A. El-Sonbaty; M.A. Abd EI-Baky | ||||
Mechanical Design and Production Engineering Department, Faculfy of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt. | ||||
Abstract | ||||
Double-notch and shod-beam shear test supports have been designed and manufactured to measure the interlaminar shear strength of cross-ply composite laminate with different off-axis angles. A cross-ply [O019O0], glasslpolyester laminate was manufactured using hand lay-up technique. The laminate was cut at different off-axis angles (OD, 15', 3O0and 45') to give ([Oo/9O"]2,, [15°/-750]b, [30°/-60°]&, [45°1-450]d stacking sequences. In double-notch shear (DNS) test, the effect of shear length on interlaminar shear strength was investigated. In shortbeam shear (SBS) test, the effect of specimen width on apparent interlaminar shear strength was studied. The interlaminar shear stress distribution for both DNS and SBS specimens were obtained. Failure modes of DNS and SBS specimens were investigated. | ||||
Keywords | ||||
Composite; short-beam; double-notch; cross-ply; off-axis angle; interlaminar shear | ||||
Statistics Article View: 94 PDF Download: 152 |
||||