Novel Green Coloration of Cotton Fabric. Part II: Effect of Different Print Paste Formulations on The Printability of Bio-mordanted Fabric with Madder Natural Dye | ||||
| Egyptian Journal of Chemistry | ||||
| Article 6, Volume 63, Issue 5, May 2020, Page 1669-1677 PDF (1.33 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2020.22637.2345 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Nahed Ahmed1; Sahar Nassar1; Reda M El-Shishtawy  2
| ||||
| 1Dyeing, Printing and Textile Auxiliaries Department, Textile Research Division, National Research Center, Dokki, Giza, 12622, Egypt. | ||||
| 2Chemistry Department, Faculty of Science, King Abdulaziz University, Jeddah 21589, Saudi Arabia. | ||||
| Abstract | ||||
| Gelatin-tannic acid (bio-mordant) treated cotton fabric was printed with natural and synthetic thickeners. Madder natural dye was used with different thickeners include meypro gum, carboxymethyl cellulose, sodium alginate, or acrylate-based synthetic thickener. Different factors such as pH, steaming temperatures, time, auxiliaries (urea, salt, and binder) presence or absence in the print paste formulations were investigated. The data indicated good quality prints using natural thickeners and without auxiliaries compared with the synthetic one. The printed samples reveal very good to excellent fastness properties. Hence, the present process of printing cotton fabric with green print paste formulation and without auxiliaries may find wide application in textile coloration. | ||||
| Keywords | ||||
| Ecological; Green printing; Natural Dye; Cotton; Bio-mordanting; Gelatin-tannic acid | ||||
|
Statistics Article View: 640 PDF Download: 590 |
||||
