NEW THICKENING AGENT BASES ON ALOE VERA GEL FOR DISPERSE PRINTING OF POLYESTER | ||||
Al-Azhar Bulletin of Science | ||||
Article 8, Volume 22, Issue 2-A, December 2011, Page 81-92 PDF (149.45 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/absb.2011.7019 | ||||
View on SCiNiTO | ||||
Abstract | ||||
The technical feasibility of using Aloe vera gel as a new thickener for printing polyester with disperse dyes was examined. Results obtained indicate that the properties of the printed fabric samples (colour strength K/S and over-all fastness properties, handle and sharpness are determined by jel concentration, type and concentration of additive, i.e. (urea, citric acid), as well as the fixation condition using super-heated steam technique. The optimum conditions for printing polyester fibre with disperse dyes using Aloe vera jel as a thickener, were as follow: 30 g/kg disperse dye, 50g/kg urea, 15g/kg citric acid, 500g/kg Aloe vera thickener 50% ,drying at 100°C/3 min followed by steam fixation for 6 min. at 180°C. | ||||
Keywords | ||||
Aloe vera; Thickener; polyester; Disperse Printing | ||||
Statistics Article View: 225 PDF Download: 335 |
||||